Re: [tuner23] Re: Air Temp Sensor?

["Jeffrey Engel" <jengeltx@yahoo.com>]

John,

No, there's a pullup resistor on it, so the input will
be +5v.  Yes, it probably sets a code and uses default
value that doesn't change with air charge temperature.

The results should be the same.

$0.02,

Jeffrey Engel
--- John Baas <xr4tic@ameritech.net> wrote:
> With no sensor attached, the EEC sees 0V, and there
> should be a parameter
> that has ACT minimum.  Is the minimum just for
> setting codes, or does the
> EEC use a default value when that minimum is
> reached?
>
> Plus Dan wrote that the ACT does not retard the
> timing, so if that's the
> case, there should be no affect whatsoever with it
> plugged in or not.
>
> John Baas
> http://a4tqms.tripod.com


__________________________________________________
Do You Yahoo!?
Find a job, post your resume.
http://careers.yahoo.com

to post: tuner23@yahoogroups.com
to unsubscribe: tuner23-unsubscribe@yahoogroups.com
to change email delivery settings: http://groups.yahoo.com/group/tuner23
to share a file: http://groups.yahoo.com/files/tuner23/ 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/