Okay here is what i have, 93 mustang, Built 87 turbo
coupe engine, 5.7 rods, big valve head, gutted intake,
3"dp, huge front mount spearco, LA3 ecu. blah, blah,
blah. just got it running, runs great, here is the
problem. I went to screw the air temp sensor into the
intake, and the hole is half the size of the sensor.
so i dont know what this lower intake came off of.
ive got a couple xr lowers, some have the big hole
and some dont have a hole at all. so my question is.
what is this intake off of? and how wil the car run
with the sensor not hooked up at all? plug just
hanging. I am eventually going to dril and tap the
upper for the sensor. and another stupid question i
have is how are you supposed to use a timing light to
set the timing with an underdrive crank pulley(racer
Walsh) there are no notches like the stock crank,
just timing marks on the front a full 360. i guess i
could put the stock pulley back on then set the
timing. but i wanted to put the notches on the
underdrive so i dont have to swap it everytime i want
to set the timng.
Chad
__________________________________________________
Do You Yahoo!?
Find a job, post your resume.
http://careers.yahoo.com
to post: tuner23@yahoogroups.com
to unsubscribe: tuner23-unsubscribe@yahoogroups.com
to change email delivery settings: http://groups.yahoo.com/group/tuner23
to share a file: http://groups.yahoo.com/files/tuner23/
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/