Mail Index

• Thread Index

• [tuner23] XR4Ti Dyno results
  • From: "Martin Musial" <mjmusial@techport.com>
• Re: [tuner23] XR4Ti Dyno results
  • From: "Tony Vissoc" <vissoctl@yahoo.com>
• RE: [tuner23] XR4Ti Dyno results
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] test
  • From: DaveBob9@aol.com
• Re: [tuner23] test
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: XR4Ti Dyno results
  • From: "Martin Musial" <mjmusial@techport.com>
• Re: [tuner23] Re: XR4Ti Dyno results
  • From: Imakeyougofast@aol.com
• [tuner23] Re: XR4Ti Dyno results
  • From: "Martin Musial" <mjmusial@techport.com>
• Re: [tuner23] Re: XR4Ti Dyno results
  • From: Imakeyougofast@aol.com
• [tuner23] Re: XR4Ti Dyno results
  • From: Slaysman@aol.com
• [tuner23] tuner issues
  • From: caroth@rothfam.com
• Re: [tuner23] tuner issues
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] Re: tuner issues
  • From: luxferro397@yahoo.com
• Re: [tuner23] tuner issues
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: tuner issues
  • From: "Martin Musial" <mjmusial@techport.com>
• [tuner23] OT: New ride possibility...fun!!!
  • From: ted.schaefer@mp.msl.com
• [tuner23] PCMX website
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• [tuner23] Re: tuner issues
  • From: caroth@rothfam.com
• [tuner23] Re: tuner issues - KAM what is actually remembered?
  • From: dcolvin_xr4@yahoo.com
• Re: [tuner23] PCMX website
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Datalogging?
  • From: "Chris" <dcalex@bellsouth.net>
• Re: [tuner23] Re: tuner issues - KAM what is actually remembered?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] PCMX website
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• Re: [tuner23] Datalogging?
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: KAM what is actually remembered?
  • From: dcolvin_xr4@yahoo.com
• [tuner23] Fwd: Help with 2.3 "dyno" software calibration.
  • From: "Jon L." <jonl@lowdown.com>
• Re: [tuner23] Re: KAM what is actually remembered?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: KAM what is actually remembered?
  • From: "Steven Beem" <stevebeem@yahoo.com>
• [tuner23] Re: KAM what is actually remembered?
  • From: dcolvin_xr4@yahoo.com
• [tuner23] FMU
  • From: "Ray Garcia" <xr500t@hotmail.com>
• Re: [tuner23] FMU
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] clutch question
  • From: chase2730@aol.com
• Re: [tuner23] clutch question
  • From: "Jason Richardson" <groups@merkurboys.com>
• Re: [tuner23] clutch question
  • From: Shaftage042@aol.com
• Re: [tuner23] clutch question
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] FMU
  • From: "Ray Garcia" <xr500t@hotmail.com>
• [tuner23] AIr Temp Sensor?
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• RE: [tuner23] AIr Temp Sensor?
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Re: KAM what is actually remembered?
  • From: "Steven Beem" <stevebeem@yahoo.com>
• Re: [tuner23] AIr Temp Sensor?
  • From: "Jason Wade" <wadejaysin@earthlink.net>
• Re: [tuner23] AIr Temp Sensor?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] more drag results with AMS cam
  • From: "Martin Musial" <mjmusial@techport.com>
• Re: [tuner23] AIr Temp Sensor?
  • From: "William A Williams" <bwmsbldr@juno.com>
• RE: [tuner23] AIr Temp Sensor?
  • From: "Shidel Scott" <scott.shidel@swpc.siemens.com>
• [tuner23] Re: AIr Temp Sensor?/SETTING TIMING
  • From: rcasner@pacbell.net
• Re: [tuner23] AIr Temp Sensor?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] Need some serious help!
  • From: Shaftage042@aol.com
• [tuner23] Re: AIr Temp Sensor?
  • From: harold@princessharold.net
• Re: [tuner23] Re: AIr Temp Sensor?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] Re: AIr Temp Sensor?
  • From: harold@princessharold.net
• RE: [tuner23] Re: AIr Temp Sensor?
  • From: "Shidel Scott" <scott.shidel@swpc.siemens.com>
• Re: [tuner23] Re: AIr Temp Sensor?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Re: AIr Temp Sensor?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] Re: Air Temp Sensor?
  • From: dcolvin_xr4@yahoo.com
• RE: [tuner23] Re: AIr Temp Sensor?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Re: Air Temp Sensor?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Re: AIr Temp Sensor?
  • From: "Avanti" <duecento@Home.com>
• Re: [tuner23] Re: Air Temp Sensor?
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] Re: Air Temp Sensor?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Re: Air Temp Sensor?
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] Re: Air Temp Sensor?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] Idle RPM adjustment policy...
  • From: "Marcin Olczyk" <7thWave@polbox.com>
• Re: [tuner23] Re: Air Temp Sensor?
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Re: AIr Temp Sensor?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: AIr Temp Sensor?
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• Re: [tuner23] Re: AIr Temp Sensor?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] Re: AIr Temp Sensor?
  • From: f_moss@hotmail.com
• [tuner23] Re: Download Power Sequence
  • From: f_moss@hotmail.com
• Re: [tuner23] Re: AIr Temp Sensor?
  • From: "Avanti" <duecento@Home.com>
• Re: [tuner23] Re: AIr Temp Sensor?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: Air Temp Sensor?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] Re: Air Temp Sensor?
  • From: dcolvin_xr4@yahoo.com
• [tuner23] Re: Re: AIr Temp Sensor?
  • From: "Allan" <a.slocum@mindspring.com>
• Re: [tuner23] Re: AIr Temp Sensor?
  • From: mc2racing@aol.com
• [tuner23] passed CA smog
  • From: "Allan" <a.slocum@mindspring.com>
• Re: [tuner23] passed CA smog
  • From: "Jason Wade" <wadejaysin@earthlink.net>
• Re: [tuner23] passed CA smog
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] passed CA smog
  • From: "Carl Morris" <morrisc@frii.com>
• Re: [tuner23] passed CA smog
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] passed CA smog
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• [tuner23] Re: passed CA smog
  • From: "Allan" <a.slocum@mindspring.com>
• Re: [tuner23] passed CA smog
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] passed CA smog
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• Re: [tuner23] Re: passed CA smog
  • From: "Jason Wade" <wadejaysin@earthlink.net>
• [tuner23] In Denver Again
  • From: capri5oh@aol.com
• [tuner23] EEC programing language, FORTRAN
  • From: crisdresch@hotmail.com
• RE: [tuner23] EEC programing language, FORTRAN
  • From: "Shidel Scott" <scott.shidel@swpc.siemens.com>
• RE: [tuner23] EEC programing language, FORTRAN
  • From: "Jim Wirt" <jwirt@ucsd.edu>
• Re: [tuner23] EEC programing language, FORTRAN
  • From: "Avanti" <duecento@Home.com>
• Re: [tuner23] EEC programing language, FORTRAN
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] Re: Ford source code
  • From: dcolvin_xr4@yahoo.com
• [tuner23] Re: Ford source code
  • From: caroth@rothfam.com
• Re: [tuner23] Re: Ford source code
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Lee Eldridge" <EldridgeL@PowerLogic.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Andrew & Karen" <aklim1@home.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• Re: [Re: [tuner23] Mass Air Conversion kit and Tune Up]
  • From: "Jeff Baker" <baker.jeff@usa.net>
• RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]
  • From: "Lee Eldridge" <EldridgeL@PowerLogic.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [Re: [tuner23] Mass Air Conversion kit and Tune Up]
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Jeff Baker" <baker.jeff@usa.net>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Carl Morris" <cd2@mail.rothfam.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• Re: [Re: [tuner23] Mass Air Conversion kit and Tune Up]
  • From: "Andrew & Karen" <aklim1@home.com>
• RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]
  • From: "Lee Eldridge" <EldridgeL@PowerLogic.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Andrew & Karen" <aklim1@home.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Andrew & Karen" <aklim1@home.com>
• Re: [Re: [tuner23] Mass Air Conversion kit and Tune Up]
  • From: "Andrew & Karen" <aklim1@home.com>
• Re: [tuner23] FMU
  • From: "Kevin Journey" <kjourney@surry.net>
• RE: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Carl Morris" <cd2@mail.rothfam.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "RS" <RS450@YAHOO.COM>
• RE: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up
  • From: "Carl Morris" <cd2@mail.rothfam.com>
• [tuner23] Fuel Puddle Multiplier
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "David Weiner" <barondw@worldnet.att.net>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: Fuel Puddle Multiplier
  • From: dcolvin_xr4@yahoo.com
• Re: [Re: [tuner23] Mass Air Conversion kit and Tune Up]
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] Breakout Box
  • From: "Lee Eldridge" <EldridgeL@PowerLogic.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Martin Musial" <mjmusial@techport.com>
• [tuner23] Re: MP's Mass Air Kit's
  • From: davereichert@juno.com
• [tuner23] LA2 VS LA3
  • From: "Dave Friske" <svtboy@yahoo.com>
• RE: [tuner23] LA2 VS LA3
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "David Weiner" <barondw@worldnet.att.net>
• RE: [tuner23] Re: Fuel Puddle Multiplier
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: svobrown@cs.com
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Duecento" <duecento@Home.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "David Weiner" <barondw@worldnet.att.net>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Duecento" <duecento@Home.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• RE: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Shidel Scott" <scott.shidel@swpc.siemens.com>
• RE: [tuner23] LA2 VS LA3
  • From: "Dave Friske" <svtboy@yahoo.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Noel W." <jdno@ix.netcom.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] LA2 VS LA3
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] LA2 VS LA3
  • From: "Dave Friske" <svtboy@yahoo.com>
• [tuner23] Re: LA3 Fuel Tables
  • From: dcolvin_xr4@yahoo.com
• [tuner23] Re: PE/LA3 fuel tables
  • From: dcolvin_xr4@yahoo.com
• RE: [tuner23] LA2 VS LA3
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] Re: PE/LA3 fuel tables
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Article on the EEC Tuner in MM&FF (Online)
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] LA2 VS LA3
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] LA2 VS LA3
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Article on the EEC Tuner in MM&FF (Online)
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• RE: [tuner23] LA2 VS LA3
  • From: "RS" <RS450@YAHOO.COM>
• [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: scott.shidel@swpc.siemens.com
• [tuner23] Test, ignore
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• RE: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Martin Musial" <mjmusial@techport.com>
• RE: [tuner23] LA2 VS LA3
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [RE: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Andrew & Karen" <aklim1@charter.net>
• Re: [RE: [tuner23] Mass Air Conversion kit and Tune Up]]]
  • From: "Jeff Baker" <baker.jeff@usa.net>
• RE: [tuner23] LA2 VS LA3
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• Re: [Re: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Duecento" <duecento@Home.com>
• Re: [tuner23] LA2 VS LA3
  • From: "Dave Friske" <svtboy@yahoo.com>
• RE: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "RS" <RS450@YAHOO.COM>
• RE: [RE: [tuner23] Mass Air Conversion kit and Tune Up]]]
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [RE: [tuner23] Mass Air Conversion kit and Tune Up]]]
  • From: "RS" <RS450@YAHOO.COM>
• RE: [tuner23] Mass Air Conversion kit and Tune Up]]
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• [tuner23] Re: Greddy A/F guage
  • From: "Carter Shore" <clshore@yahoo.com>
• [tuner23] My LA Vacation
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• Re: [tuner23] Re: Greddy A/F guage
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• Re: [tuner23] Re: Greddy A/F guage
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] test
  • From: "Lee Eldridge" <EldridgeL@PowerLogic.com>
• [tuner23] Joke of the Day
  • From: "Ray Garcia" <xr500t@hotmail.com>
• [tuner23] joke of the day
  • From: "Ray Garcia" <xr500t@hotmail.com>
• Re: [tuner23] joke of the day
  • From: svobrown@cs.com
• [tuner23] LA3, LB3 and 8UA differences?
  • From: "merk_xr4" <merk_xr4@yahoo.com>
• RE: [tuner23] LA3, LB3 and 8UA differences?
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Re: LA3, LB3 and 8UA differences?
  • From: "merk_xr4" <merk_xr4@yahoo.com>
• Re: [tuner23] Re: LA3, LB3 and 8UA differences?
  • From: "John Baas" <xr4tic@ameritech.net>
• [tuner23] Re: LA3, LB3... ACT sensor
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Off subject
  • From: "merkurnut" <ldavis9965@aol.com>
• Re: [tuner23] Off subject
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Digest Number 282
  • From: ldavis9965@aol.com
• Re: [tuner23] Digest Number 282
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Closed Loop Changes - HEGO Bias?
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Closed Loop Changes - HEGO Bias?
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Closed Loop Changes - HEGO Bias?
  • From: "Jason Wade" <wadejaysin@earthlink.net>
• Re: [tuner23] Digest Number 283
  • From: ldavis9965@aol.com
• RE: [tuner23] Closed Loop Changes - HEGO Bias?
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Deltagate
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• Re: [tuner23] Deltagate
  • From: Projectsvo@aol.com
• [tuner23] Re: Closed Loop Changes - HEGO Bias?
  • From: Slaysman@aol.com
• Re: [tuner23] Deltagate
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• [tuner23] Re: Closed Loop Changes-HEGO Bias?/ Cyl #3 Detonation
  • From: "S. Colson" <merkur86@yahoo.com>
• Re: [tuner23] Re: Closed Loop Changes-HEGO Bias?/ Cyl #3 Detonation
  • From: CLUBCRAFTGOLF@aol.com
• [tuner23] Re: Closed Loop Changes-HEGO Bias?/ Cyl #3 Detonation
  • From: Slaysman@aol.com
• [tuner23] Re: Closed Loop Changes-HEGO Bias?/ Cyl #3 Detonation
  • From: ted.schaefer@mp.msl.com
• [tuner23] Re: Closed Loop Changes-HEGO Bias?/ Cyl #3 Detonation
  • From: "qhap2001" <qhap@earthlink.net>
• [tuner23] BCS logic
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] BCS logic
  • From: "Jason Wade" <wadejaysin@earthlink.net>
• Re: [tuner23] BCS logic
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] BCS logic
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• RE: [tuner23] BCS logic
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] BCS logic
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• RE: [tuner23] BCS logic
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] BCS logic
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] BCS logic
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] BCS logic
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] tuner
  • From: "crznwagn" <tkz35@suite224.net>
• Re: [tuner23] tuner
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Cyl #3 trouble
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] Cyl #3 trouble
  • From: ASchleinig@aol.com
• Re: [tuner23] Cyl #3 trouble
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] tuner
  • From: "P W D" <tkz35@suite224.net>
• RE: [tuner23] BCS logic
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] BCS logic
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Cyl #3 trouble
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] Cyl #3 trouble
  • From: Merk23literturbo@aol.com
• Re: [tuner23] BCS logic
  • From: svobrown@cs.com
• Re: [tuner23] Cyl #3 trouble
  • From: ASchleinig@aol.com
• [tuner23] Cosworth T5 Crossmember
  • From: "Andrew & Karen" <aklim1@charter.net>
• [tuner23] RE: [M] Cosworth T5 Crossmember
  • From: "David Compton" <dcdcompton@yahoo.com>
• [tuner23] Carlisle 2002 Early Club Registration
  • From: "barondw" <barondw@worldnet.att.net>
• [tuner23] 4.0l turbo
  • From: "jakeflemingiii" <jakefleming@earthlink.net>
• [tuner23] 4.0l turbo
  • From: "jakeflemingiii" <jakefleming@earthlink.net>
• Re: [tuner23] 4.0l turbo
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] EEC Tuner questions
  • From: Merk23literturbo@aol.com
• Re: [tuner23] EEC Tuner questions
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] EEC Tuner questions
  • From: Merk23literturbo@aol.com
• Re: [tuner23] EEC Tuner questions
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] My Project(one of a few)
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] 4.0l turbo
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] High idle...
  • From: "mikeyfyr" <Mikeyfyr@aol.com>
• Re: [tuner23] High idle...
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] Re: High idle...
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] High idle...
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] Re: High idle...
  • From: Slaysman@aol.com
• [tuner23] Re: High idle...
  • From: "mikeyfyr" <Mikeyfyr@aol.com>
• Re: [tuner23] Re: High idle...
  • From: ASchleinig@aol.com
• Re: [tuner23] Re: High idle...
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Re: High idle...
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• [tuner23] A little OT, Processor Code question for 5.0
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• Re: [tuner23] A little OT, Processor Code question for 5.0
  • From: "Paul Booth" <pboothus@pacbell.net>
• Re: [tuner23] A little OT, Processor Code question for 5.0
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] A little OT, Processor Code question for 5.0
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• Re: [tuner23] A little OT, Processor Code question for 5.0
  • From: "Paul Booth" <pboothus@pacbell.net>
• Re: [tuner23] A little OT, Processor Code question for 5.0
  • From: "Paul Booth" <pboothus@pacbell.net>
• Re: [tuner23] A little OT, Processor Code question for 5.0
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• [tuner23] Re: Welcome to tuner23
  • From: "Albino" <jumpintodajungle@yahoo.com>
• Re: [tuner23] A little OT, Processor Code question for 5.0
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: High idle...
  • From: "mikeyfyr" <Mikeyfyr@aol.com>
• Re: [tuner23] A little OT, Processor Code question for 5.0
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• Re: [tuner23] A little OT, Processor Code question for 5.0
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Location of PCMX support page?
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Dash Gauge for VAM Readings
  • From: Slaysman@aol.com
• Re: [tuner23] A little OT, Processor Code question for 5.0
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• [tuner23] Re: Dash Gauge for VAM Readings
  • From: "Allan" <a.slocum@mindspring.com>
• Re: [tuner23] Re: Dash Gauge for VAM Readings
  • From: "William A Williams" <bwmsbldr@juno.com>
• RE: [tuner23] Re: Dash Gauge for VAM Readings
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Re: Dash Gauge for VAM Readings
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• Re: [tuner23] Re: Dash Gauge for VAM Readings
  • From: "William A Williams" <bwmsbldr@juno.com>
• RE: [tuner23] Re: Dash Gauge for VAM Readings
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Re: Dash Gauge for VAM Readings
  • From: "Duecento" <duecento@AttBi.com>
• [tuner23] Cold Start Problems with Tuner?
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Cold Start Problems with Tuner?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• RE: [tuner23] Cold Start Problems with Tuner?
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Cold Start Problems with Tuner?
  • From: "RS" <RS450@YAHOO.COM>
• RE: [tuner23] Cold Start Problems with Tuner?
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Fw: Virii
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Fw: Virii
  • From: Eshffmn@aol.com
• [tuner23] Re: High idle...
  • From: "Marcin Olczyk" <euroxr@wp.pl>
• [tuner23] Cam follower discussion
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] Fuel Leak?
  • From: "jumpintodajungle" <jumpintodajungle@yahoo.com>
• Re: [tuner23] Fuel Leak?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Fuel Leak?
  • From: svobrown@cs.com
• RE: [tuner23] Fuel Leak?
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• [tuner23] Re: Dash Gauge for VAM Readings
  • From: "dcdcompton" <dcdcompton@yahoo.com>
• [tuner23] 2.3 block & head
  • From: "wdmovette" <davemarlin@att.net>
• Re: [tuner23] 2.3 block & head
  • From: svobrown@cs.com
• RE: [tuner23] 2.3 block & head
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] 2.3 block & head
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] 2.3 block & head
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] 2.3 block & head
  • From: svobrown@cs.com
• RE: [tuner23] 2.3 block & head
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] 2.3 block & head
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] Re: 2.3 block & head
  • From: "wdmovette" <davemarlin@att.net>
• [tuner23] 8UA EDF/HEDF circuits?
  • From: "merk_xr4" <merk_xr4@yahoo.com>
• Re: [tuner23] 8UA EDF/HEDF circuits?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] 8UA EDF/HEDF circuits?
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] 8UA EDF/HEDF circuits?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] 8UA EDF/HEDF circuits?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] 8UA EDF/HEDF circuits?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• RE: [tuner23] 8UA EDF/HEDF circuits?
  • From: "Jeff Baker" <baker.jeff@usa.net>
• Re: [tuner23] 8UA EDF/HEDF circuits?
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] Re: 8UA EDF/HEDF circuits?
  • From: "merk_xr4" <merk_xr4@yahoo.com>
• Re: [[tuner23] Re: 8UA EDF/HEDF circuits?]
  • From: "Jeff Baker" <baker.jeff@usa.net>
• [tuner23] Fwd: 10% Off Crower Cams & Competition Cams!
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: EEC Tuner Datalogging
  • From: "mytkwik1" <mytkwik@hotmail.com>
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• [tuner23] Re: EEC Tuner Datalogging
  • From: "mytkwik1" <mytkwik@hotmail.com>
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: sduchene@mindspring.com
• [tuner23] Re: EEC Tuner Datalogging
  • From: "mytkwik1" <mytkwik@hotmail.com>
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: sduchene@mindspring.com
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: "El-rouby Moe" <merouby4@yahoo.co.uk>
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: EEC Tuner Datalogging
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: sduchene@mindspring.com
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: "Paul Booth" <pboothus@pacbell.net>
• [tuner23] Re: EEC Tuner Datalogging
  • From: "haroldina" <harold@princessharold.net>
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: sduchene@mindspring.com
• Re: [tuner23] Re: EEC Tuner Datalogging
  • From: "Chris Kachelmyer" <harold@princessharold.net>
• [tuner23] Turbo cars
  • From: "master97162000" <master97162000@yahoo.com>
• Re: [tuner23] Turbo cars
  • From: svobrown@cs.com
• Re: [tuner23] Turbo cars
  • From: Merk23literturbo@aol.com
• RE: [tuner23] Turbo cars
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] Turbo cars
  • From: "William A Williams" <bwmsbldr@juno.com>
• RE: [tuner23] Turbo cars
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• [tuner23] exhaust turbine housings
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] XRTI4 HARD TO START AUTOMATIC
  • From: jp17456687@aol.com
• Re: [tuner23] Turbo cars
  • From: "Jason Wade" <wadejaysin@earthlink.net>
• Re: [tuner23] XRTI4 HARD TO START AUTOMATIC
  • From: Merk23literturbo@aol.com
• Re: [tuner23] Turbo cars
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] XRTI4 HARD TO START AUTOMATIC
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] tuner23@yahoogroups.com
  • From: "Ric Gillis" <RicGillis@boostvalve.com>
• Re: [tuner23] tuner23@yahoogroups.com
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] tuner23@yahoogroups.com
  • From: "Jason Wade" <wadejaysin@earthlink.net>
• [tuner23] ROUGH RUINNG AUTOMATIC XR4TI WAST GATE?
  • From: jp17456687@aol.com
• RE: [tuner23] tuner23@yahoogroups.com
  • From: "Ric Gillis" <RicGillis@boostvalve.com>
• RE: [tuner23] ROUGH RUINNG AUTOMATIC XR4TI WAST GATE?
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] tuner23@yahoogroups.com
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Turbo cars
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• [tuner23] VAF Functions
  • From: "pboothus" <pboothus@pacbell.net>
• Re: [tuner23] ROUGH RUINNG AUTOMATIC XR4TI WAST GATE?
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] More Magical Thinking
  • From: "Duecento" <duecento@AttBi.com>
• Re: [tuner23] More Magical Thinking
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Turbo cars
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Turbo cars
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• Re: [tuner23] More Magical Thinking
  • From: "Duecento" <duecento@AttBi.com>
• Re: [tuner23] VAF Functions
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] 52lb Injectors
  • From: "luxferro397" <luxferro397@yahoo.com>
• Re: [tuner23] VAF Functions
  • From: "Paul Booth" <pboothus@pacbell.net>
• [tuner23] Removing Creature Comforts
  • From: "albin0" <jumpintodajungle@yahoo.com>
• Re: [tuner23] 52lb Injectors
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] RE: Software (was VAF Functions)
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• Re: [tuner23] 52lb Injectors
  • From: "Jason Richardson" <groups@merkurboys.com>
• Re: [tuner23] 52lb Injectors
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• Re: [tuner23] Removing Creature Comforts
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• Re: [tuner23] 52lb Injectors
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] PE computer, Big VAM, 35lb inj's
  • From: "bigbraxx" <braxx@mediaone.net>
• [tuner23] Re: 52lb Injectors
  • From: "luxferro397" <luxferro397@yahoo.com>
• Re: [tuner23] Re: 52lb Injectors
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] 52lb Injectors
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Re: 52lb Injectors
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: 52lb Injectors
  • From: "Duecento" <duecento@AttBi.com>
• Re: [tuner23] Re: 52lb Injectors
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: 52lb Injectors
  • From: "Duecento" <duecento@AttBi.com>
• Re: [tuner23] Re: 52lb Injectors
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] PCMX tuning basics and .rdf file changes.
  • From: "Boris Besedin" <bbesedin@siebel.com>
• Re: [tuner23] PCMX tuning basics and .rdf file changes.
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• Re: [tuner23] 52lb Injectors
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• [tuner23] Re: 52lb Injectors
  • From: "luxferro397" <luxferro397@yahoo.com>
• [tuner23] Re: 52lb Injectors
  • From: "luxferro397" <luxferro397@yahoo.com>
• Re: [tuner23] Re: 52lb Injectors
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] PCMX tuning basics and .rdf file changes.
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] 52lb Injectors
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Removing Creature Comforts
  • From: "albin0" <jumpintodajungle@yahoo.com>
• Re: [tuner23] Removing Creature Comforts
  • From: "Avanti" <duecento@AttBi.com>
• Re: [tuner23] Removing Creature Comforts
  • From: "albin0" <jumpintodajungle@yahoo.com>
• Re: [tuner23] Removing Creature Comforts
  • From: "Avanti" <duecento@AttBi.com>
• RE: [tuner23] Removing Creature Comforts
  • From: "Dick Pearson" <dpearson@uwgrocers.com>
• RE: [tuner23] PCMX tuning basics and .rdf file changes.
  • From: "Boris Besedin" <bbesedin@siebel.com>
• [tuner23] Re: Removing Creature Comforts
  • From: "merk_xr4" <merk_xr4@yahoo.com>
• RE: [tuner23] Re: Removing Creature Comforts
  • From: "Dick Pearson" <dpearson@uwgrocers.com>
• Re: [tuner23] PCMX tuning basics and .rdf file changes.
  • From: sduchene@mindspring.com
• Re: [tuner23] Removing Creature Comforts
  • From: Grve66@aol.com
• Re: [tuner23] Removing Creature Comforts
  • From: "d" <dimswits@ix.netcom.com>
• RE: [tuner23] PCMX tuning basics and .rdf file changes.
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] 52lb Injectors
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• [tuner23] Cosworth EEC-IV
  • From: "El-rouby Moe" <merouby4@yahoo.co.uk>
• Re: [tuner23] Cosworth EEC-IV
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: Cosworth EEC-IV
  • From: bugzturbo@aol.com
• Re: [tuner23] Digest Number 322
  • From: "Carter Shore" <clshore@yahoo.com>
• Re: [tuner23] Re: Cosworth EEC-IV
  • From: turboegt@aol.com
• [tuner23] RE: EEC IV support of "other" motors
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] Re: Cosworth EEC-IV
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• [tuner23] Re: Fuel Leak?
  • From: "bccturbo" <bccturbo@hotmail.com>
• [tuner23] '86 Turbo Coupe
  • From: "bccturbo" <bccturbo@hotmail.com>
• Re: [tuner23] '86 Turbo Coupe
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: Cosworth EEC-IV
  • From: "Greg Pitz" <gregpitz@compsolv.com>
• Re: [tuner23] Re: Cosworth EEC-IV
  • From: "David Weiner" <barondw@worldnet.att.net>
• Re: [tuner23] Re: Cosworth EEC-IV
  • From: "Greg Pitz" <gregpitz@compsolv.com>
• Re: [tuner23] Re: Cosworth EEC-IV
  • From: "Duecento" <duecento@AttBi.com>
• RE: [tuner23] Re: Cosworth EEC-IV
  • From: "Chris Talbert" <ctalbert@geaf.com>
• RE: [tuner23] Re: Cosworth EEC-IV
  • From: "El-rouby Moe" <merouby4@yahoo.co.uk>
• [tuner23] Re: Cosworth EEC-IV
  • From: "Marcin Olczyk" <euroxr@wp.pl>
• [tuner23] Re: Cosworth EEC-IV
  • From: bugzturbo@aol.com
• RE: [tuner23] LA3 wiring diagram
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] TFS is looking into casting new heads.
  • From: "bigbraxx" <braxx@mediaone.net>
• Re: [tuner23] TFS is looking into casting new heads.
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] TFS is looking into casting new heads.
  • From: "David Weiner" <barondw@worldnet.att.net>
• RE: [tuner23] TFS is looking into casting new heads.
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] TFS is looking into casting new heads.
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] TFS is looking into casting new heads.
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] TFS is looking into casting new heads.
  • From: "David Weiner" <barondw@worldnet.att.net>
• Re: [tuner23] Digest Number 324
  • From: ldavis9965@aol.com
• [tuner23] Re: [xr4ti] TFS is looking into casting new heads.
  • From: "Andrew & Karen" <aklim1@charter.net>
• [tuner23] Re: [xr4-hardcore] Re: [xr4ti] TFS is looking into castingnew heads.
  • From: "Andrew & Karen" <aklim1@charter.net>
• Re: [tuner23] Re: [xr4-hardcore] Re: [xr4ti] TFS is looking intocasting new heads.
  • From: "El-rouby Moe" <merouby4@yahoo.co.uk>
• [tuner23] Sample Rate of the EEC Tuner Data logging?
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• [tuner23] Re: TFS is looking into casting new heads
  • From: "Allan" <a.slocum@mindspring.com>
• Re: [tuner23] Re: TFS is looking into casting new heads
  • From: "David Weiner" <barondw@worldnet.att.net>
• Re: [tuner23] Re: TFS is looking into casting new heads
  • From: "Avanti" <duecento@AttBi.com>
• Re: [tuner23] Re: TFS is looking into casting new heads
  • From: "Kirk Svalstad" <svalstad@aznet.net>
• [tuner23] Re: Cosworth EEC-IV
  • From: "Marcin Olczyk" <euroxr@wp.pl>
• Re: [tuner23] Re: TFS is looking into casting new heads
  • From: "michael krader" <mjkrader@yahoo.com>
• [tuner23] Re: Cold Start Problems with Tuner?
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• [tuner23] Bosch MAF Transfer Function
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• [tuner23] Fwd: HUGE Savings on *Superchargers & 10% Off Desktop Dynos!
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Any more news on the P series Datalogging?
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• RE: [tuner23] Bosch MAF Transfer Function
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] Bosch MAF Transfer Function
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] Bosch MAF Transfer Function
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] Bosch MAF Transfer Function
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Bosch MAF Transfer Function
  • From: "D Wynter" <biggamu@attglobal.net>
• Re: [tuner23] Bosch MAF Transfer Function
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• [tuner23] A cautionary/funny tale about the IAC
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] Few EEC tuner questions?
  • From: "sctur601" <sctur601@yahoo.com>
• Re: [tuner23] Few EEC tuner questions?
  • From: "El-rouby Moe" <merouby4@yahoo.co.uk>
• Re: [tuner23] Few EEC tuner questions?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] SS Valves, C4 bellhousings, 87 TC motor and more
  • From: "bigbraxx" <braxx@mediaone.net>
• Re: [tuner23] SS Valves, C4 bellhousings, 87 TC motor and more
  • From: "Duecento" <duecento@AttBi.com>
• RE: [tuner23] SS Valves, C4 bellhousings, 87 TC motor and more
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• [[tuner23] Re: 8UA EDF/HEDF circuits?]
  • From: "merk_xr4" <merk_xr4@yahoo.com>
• Re: [[tuner23] Re: 8UA EDF/HEDF circuits?]
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• RE: [[tuner23] Re: 8UA EDF/HEDF circuits?]
  • From: "Jeff Baker" <baker.jeff@usa.net>
• RE: [[tuner23] Re: 8UA EDF/HEDF circuits?]
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• Re: [[tuner23] Re: 8UA EDF/HEDF circuits?]
  • From: "Avanti" <duecento@AttBi.com>
• [tuner23] PCMX
  • From: "mytkwik1" <mytkwik@hotmail.com>
• RE: [tuner23] PCMX
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Re: PCMX
  • From: "mytkwik1" <mytkwik@hotmail.com>
• [tuner23] burning chips with maps
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] burning chips with maps
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] Re: burning chips with maps
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Re: burning chips with maps
  • From: "gsxr1970" <cosworth@shaw.ca>
• [tuner23] Re: burning chips with maps
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] Re: burning chips with maps
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Re: burning chips with maps
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• RE: [tuner23] Re: burning chips with maps
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Re: burning chips with maps
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] Re: burning chips with maps
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] Re: burning chips with maps
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] Re: burning chips with maps
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• [tuner23] PE?
  • From: "mikeyfyr" <Mikeyfyr@aol.com>
• Re: [tuner23] PE?
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] PCMX system requirements
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] PCMX system requirements
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: PE?
  • From: "courier_svo" <jsimmons@ainet.com>
• Re: [tuner23] PCMX system requirements
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• RE: [tuner23] PCMX system requirements
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] PCMX system requirements
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] Re: PE?
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] IAT Transfer function
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• [tuner23] Re: PCMX system requirements
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] Re: PCMX system requirements
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] IAT Transfer function
  • From: "William A Williams" <bwmsbldr@juno.com>
• RE: [tuner23] Re: PCMX system requirements
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• [tuner23] Re: PCMX system requirements
  • From: "gsxr1970" <cosworth@shaw.ca>
• RE: [tuner23] IAT Transfer function
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] IAT Transfer function
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• RE: [tuner23] IAT Transfer function
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] IAT Transfer function
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] IAT Transfer function
  • From: "William A Williams" <bwmsbldr@juno.com>
• RE: [tuner23] IAT Transfer function
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• [tuner23] Thermistors
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Thermistors
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• RE: [tuner23] Thermistors
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] IAT Transfer function
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• [tuner23] Thermistor discussion summary
  • From: "William A Williams" <bwmsbldr@juno.com>
• RE: [tuner23] Thermistor discussion summary
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• [tuner23] Sell me your eec-tuner
  • From: "gsxr1970" <cosworth@shaw.ca>
• [tuner23] Re: Probst and thermistor
  • From: "Carter Shore" <clshore@yahoo.com>
• RE: [tuner23] Re: Probst and thermistor
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] Re: Probst and thermistor
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] disabling reactive IAC control
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] Thermistors
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Thermistor discussion summary
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] disabling reactive IAC control
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Re: burning chips with maps
  • From: "John Baas" <xr4tic@ameritech.net>
• [tuner23] Re: burning chips with maps
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] Bosch MAF for VW
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Bosch MAF for VW
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] Bosch MAF for VW
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] Thermistor discussion summary and Probst.
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] Thermistor discussion summary and Probst.
  • From: capri5oh@aol.com
• Re: [tuner23] Thermistor discussion summary and Probst.
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] Thermistor discussion summary and Probst.
  • From: mustang@tampabay.rr.com
• Re: [tuner23] Thermistor discussion summary and Probst.
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Thermistors
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] Re: mass air "measurments"
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] eec for sale??
  • From: "MACK_DADD727" <mack_dadd7271@yahoo.com>
• Re: [tuner23] eec for sale??
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• RE: [tuner23] CFM to Kg/Hr Conversion
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Thermistor discussion summary and Probst.
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Re: mass air "measurements"
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] CFM to Kg/Hr Conversion
  • From: "John Baas" <xr4tic@ameritech.net>
• [tuner23] preprogrammed eec
  • From: "MACK_DADD727" <mack_dadd7271@yahoo.com>
• [tuner23] Re: preprogrammed eec
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] preprogrammed eec
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] PE?
  • From: "El-rouby Moe" <merouby4@yahoo.co.uk>
• Re: [tuner23] PE?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: PE?
  • From: "courier_svo" <jsimmons@ainet.com>
• Re: [tuner23] Re: PE?
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• [tuner23] Re: disabling reactive IAC control
  • From: "Marcin Olczyk" <euroxr@wp.pl>
• RE: [tuner23] CFM to Kg/Hr Conversion
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Re: mass air "measurements"
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: disabling reactive IAC control
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: disabling reactive IAC control
  • From: fritzy666@webtv.net
• Re: [tuner23] Re: mass air "measurements"
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Re: disabling reactive IAC control
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Re: PE?
  • From: "El-rouby Moe" <merouby4@yahoo.co.uk>
• [tuner23] need help please
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] Re: disabling reactive IAC control
  • From: "qhap2001" <qhap@earthlink.net>
• Re: [tuner23] Re: mass air "measurements"
  • From: Shaftage042@aol.com
• Re: [tuner23] Re: mass air "measurements"
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Re: mass air "measurements"
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] Re: disabling reactive IAC control
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] Re: mass air "measurements"
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: need help please
  • From: "courier_svo" <jsimmons@ainet.com>
• RE: [tuner23] Re: need help please
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Re: need help please
  • From: "courier_svo" <jsimmons@ainet.com>
• Re: [tuner23] Re: need help please
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: need help please
  • From: "El-rouby Moe" <merouby4@yahoo.co.uk>
• Re: [tuner23] Re: need help please
  • From: "michael krader" <mjkrader@yahoo.com>
• [tuner23] Re: need help please
  • From: "courier_svo" <jsimmons@ainet.com>
• Re: [tuner23] Re: mass air "measurements"
  • From: Shaftage042@aol.com
• Re: [tuner23] Re: need help please
  • From: Merk23literturbo@aol.com
• Re: [tuner23] Re: need help please
  • From: "El-rouby Moe" <merouby4@yahoo.co.uk>
• [tuner23] Re: check engine light
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] Re: disabling reactive IAC control
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• Re: [tuner23] Re: need help please
  • From: Merk23literturbo@aol.com
• Re: [tuner23] Re: need help please
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] Re: need help please
  • From: "courier_svo" <jsimmons@ainet.com>
• [tuner23] eec tuner
  • From: "MACK_DADD727" <mack_dadd7271@yahoo.com>
• Re: [tuner23] eec tuner
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] eec tuner
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] VanAaken?
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] Re: need help please
  • From: "Steven Beem" <stevebeem@yahoo.com>
• [tuner23] Re: eec tuner
  • From: "courier_svo" <jsimmons@ainet.com>
• Re: [tuner23] Re: eec tuner
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] Re: eec tuner
  • From: "courier_svo" <jsimmons@ainet.com>
• [tuner23] Re: need help please
  • From: "courier_svo" <jsimmons@ainet.com>
• Re: [tuner23] Re: eec tuner
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Re: PE?
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• Re: [tuner23] Re: eec tuner
  • From: "Paul Booth" <pboothus@pacbell.net>
• [tuner23] Re: need help please
  • From: "courier_svo" <jsimmons@ainet.com>
• Re: [tuner23] Re: check engine light
  • From: "El-rouby Moe" <merouby4@yahoo.co.uk>
• Re: [tuner23] Re: check engine light
  • From: Merk23literturbo@aol.com
• RE: [tuner23] Re: check engine light
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• Re: [tuner23] Re: need help please
  • From: "D S" <x_leaper@yahoo.ca>
• [tuner23] Re: need help please
  • From: "courier_svo" <jsimmons@ainet.com>
• [tuner23] test EOM
  • From: "Boris Besedin" <bbesedin@siebel.com>
• [tuner23] fueling question
  • From: "Boris Besedin" <bbesedin@siebel.com>
• [tuner23] How hard is it to tune the eec
  • From: "MACK_DADD727" <mack_dadd7271@yahoo.com>
• Re: [tuner23] fueling question
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Re: fueling question
  • From: "bbesedin" <bbesedin@siebel.com>
• Re: [tuner23] fueling question
  • From: Pa6pa6roach6@aol.com
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "John Baas" <xr4tic@ameritech.net>
• [tuner23] LA3 for sale
  • From: "Chris Kachelmyer" <harold@princessharold.net>
• RE: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] fueling question
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• RE: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• RE: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "John Baas" <xr4tic@ameritech.net>
• [tuner23] Re: Atlanta Merkur gathering
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: Quick & Dirty MAF for VAF swap
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• RE: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Chris Alexander" <dcalex@bellsouth.net>
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "John Baas" <xr4tic@ameritech.net>
• RE: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Quick & Dirty MAF for VAF swap
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] Re: Quick & Dirty MAF for VAF swap
  • From: "John Baas" <xr4tic@ameritech.net>
• [tuner23] Re: Quick & Dirty MAF for VAF swap
  • From: "fasturbo" <caroth@rothfam.com>
• Re: [tuner23] Re: Quick & Dirty MAF for VAF swap
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] Re: Quick & Dirty MAF for VAF swap
  • From: duecento@AttBi.com
• Re: [tuner23] Re: Quick & Dirty MAF for VAF swap
  • From: "John Baas" <xr4tic@ameritech.net>
• RE: [tuner23] Re: Quick & Dirty MAF for VAF swap
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Re: Quick & Dirty MAF for VAF swap
  • From: duecento@AttBi.com
• Re: [tuner23] Re: Quick & Dirty MAF for VAF swap
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] Re: Quick & Dirty MAF for VAF swap
  • From: "Duecento" <duecento@AttBi.com>
• Re: [tuner23] Re: bad turbo
  • From: "George Searing" <gsearing@bellsouth.net>
• Re: [tuner23] Re: bad turbo
  • From: Merk23literturbo@aol.com
• Re: [tuner23] Re: bad turbo
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] MAF conversion parts
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] Re: bad turbo
  • From: "George Searing" <gsearing@bellsouth.net>
• Re: [tuner23] Re: bad turbo
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Digest Number 357
  • From: ldavis9965@aol.com
• Re: [tuner23] Digest Number 357
  • From: "George Searing" <gsearing@bellsouth.net>
• [tuner23] Re: bad turbo
  • From: Slaysman@aol.com
• RE: [tuner23] Fuel Pump
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] 3" Bosch MAF Initial Trial Install Results
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• [tuner23] turbo question
  • From: "xr87" <deadlyspider@hotmail.com>
• Re: [tuner23] Re: bad turbo
  • From: "George Searing" <gsearing@bellsouth.net>
• Re: [tuner23] connecting rod ?s
  • From: "George Searing" <gsearing@bellsouth.net>
• Re: [tuner23] 3" Bosch MAF Initial Trial Install Results
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] MAF conversion parts
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] 3" Bosch MAF Initial Trial Install Results
  • From: "TimO" <hairballmt@mcn.net>
• RE: [tuner23] 3" Bosch MAF Initial Trial Install Results
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Re: bad turbo
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] connecting rod ?s
  • From: "Matt Miller" <mdmnur@mindspring.com>
• Re: [tuner23] 3" Bosch MAF Initial Trial Install Results
  • From: "Dan Stokes" <dstokes@coin.org>
• RE: [tuner23] 3" Bosch MAF Initial Trial Install Results
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] 3" Bosch MAF Initial Trial Install Results
  • From: "John Baas" <xr4tic@ameritech.net>
• RE: [tuner23] 3" Bosch MAF Initial Trial Install Results
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Re: MAF clipping LA3 vs PE
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Digest Number 358
  • From: ldavis9965@aol.com
• Re: [tuner23] 3" Bosch MAF Initial Trial Install Results
  • From: "John Baas" <xr4tic@ameritech.net>
• RE: [tuner23] 3" Bosch MAF Initial Trial Install Results
  • From: "Dan Stokes" <dstokes@coin.org>
• [tuner23] FYI - online MAF conversions
  • From: "gsxr1970" <cosworth@shaw.ca>
• [tuner23] Re: Scaling of PE and LA3 AMT tables
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Re: Scaling of PE and LA3 AMT tables
  • From: "rs450" <RS450@YAHOO.COM>
• Re: [tuner23] Re: Scaling of PE and LA3 AMT tables
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Need a Turbo, Mine Broke
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• [tuner23] Re: [xr4-hardcore] Need a Turbo, Mine Broke
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Fun with MAF scaling....
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] Re: bad turbo
  • From: Projectsvo@aol.com
• [tuner23] Re: Fun with MAF scaling....
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: bad turbo
  • From: "George Searing" <gsearing@bellsouth.net>
• [tuner23] Pre-Fab Fords activity
  • From: Slaysman@aol.com
• [tuner23] pk1 file
  • From: "xr400ti" <WADENVAL@EARTHLINK.NET>
• Re: [tuner23] pk1 file
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: connecting rod ?s
  • From: "rhiltonassoc" <rhiltonassoc@att.net>
• Re: [tuner23] Re: connecting rod ?s
  • From: "George Searing" <gsearing@bellsouth.net>
• Re: [tuner23] Re: connecting rod ?s
  • From: "Avanti" <duecento@AttBi.com>
• [tuner23] EEC Tuner forum on www.turboford.org is gone?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: EEC Tuner forum on www.turboford.org is gone?
  • From: "fasturbo" <caroth@rothfam.com>
• Re: [tuner23] EEC Tuner forum on www.turboford.org is gone?
  • From: "mike" <baddad@teleport.com>
• [tuner23] fuel consumption and LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• RE: [tuner23] fuel consumption and LA3
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] finally got my eec-tuner - but no car :-(
  • From: "gsxr1970" <cosworth@shaw.ca>
• RE: [tuner23] fuel consumption and LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "Tony Vissoc" <vissoctl@yahoo.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "Steven Beem" <stevebeem@yahoo.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] fuel consumption and LA3
  • From: svobrown@cs.com
• Re: [tuner23] fuel consumption and LA3
  • From: "Tony Vissoc" <vissoctl@yahoo.com>
• Re: [tuner23] Does a bigger throttle body work?
  • From: "George Searing" <gsearing@bellsouth.net>
• RE: [tuner23] Does a bigger throttle body work?
  • From: "Tim M Hovey" <thovey@swbell.net>
• Re: [tuner23] fuel consumption and LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] fuel consumption and LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "TimO" <hairballmt@mcn.net>
• Re: [tuner23] fuel consumption and LA3
  • From: "Tony Vissoc" <vissoctl@yahoo.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] off topic lean fuel consumption
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] off topic lean fuel consumption
  • From: "TimO" <hairballmt@mcn.net>
• [tuner23] Using a PF3 in a 6 cylinder Application
  • From: capri5oh@aol.com
• Re: [tuner23] off topic lean fuel consumption
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: "mike" <baddad@teleport.com>
• Re: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: "mike" <baddad@teleport.com>
• Re: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: capri5oh@aol.com
• Re: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: "mike" <baddad@teleport.com>
• Re: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: "mike" <baddad@teleport.com>
• Re: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] off topic lean fuel consumption
  • From: "Tony Vissoc" <vissoctl@yahoo.com>
• Re: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: capri5oh@aol.com
• [tuner23] 55# injectors
  • From: sarcosis@sbcglobal.net
• Re: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: "Dan Stokes" <dstokes@coin.org>
• Re: [tuner23] off topic lean fuel consumption
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] off topic lean fuel consumption
  • From: "TimO" <hairballmt@mcn.net>
• Re: [tuner23] off topic lean fuel consumption
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• RE: [tuner23] 55# injectors
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: capri5oh@aol.com
• [tuner23] 300 ZX MAF Conversion Progress
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] off topic lean fuel consumption
  • From: "Tony Vissoc" <vissoctl@yahoo.com>
• RE: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] 55# injectors
  • From: sarcosis@sbcglobal.net
• Re: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: capri5oh@aol.com
• [tuner23] Using a PF3 in a 6 cylinder Application
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] fuel consumption and LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] fuel consumption and LA3
  • From: "TimO" <hairballmt@mcn.net>
• [tuner23] dual air meters
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• RE: [tuner23] Using a PF3 in a 6 cylinder Application
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Bigger Injectors - tuning?
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] Bigger Injectors - tuning?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• RE: [tuner23] Bigger Injectors - tuning?
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] By-pass valve effect on air meter
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] By-pass valve effect on air meter
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• RE: [tuner23] By-pass valve effect on air meter
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] By-pass valve effect on air meter
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] Need information on back cutting valves
  • From: "William A Williams" <bwmsbldr@juno.com>
• RE: [tuner23] Need information on back cutting valves
  • From: "Fritz Moore" <fbmoore@ucdavis.edu>
• Re: [tuner23] Need information on back cutting valves
  • From: "Avanti" <duecento@AttBi.com>
• Re: [tuner23] Need information on back cutting valves
  • From: "Avanti" <duecento@AttBi.com>
• Re: [tuner23] Need information on back cutting valves
  • From: ASchleinig@aol.com
• Re: [tuner23] Need information on back cutting valves
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Need information on back cutting valves
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Need information on back cutting valves
  • From: "Avanti" <duecento@AttBi.com>
• RE: [tuner23] Need information on back cutting valves
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Need information on back cutting valves
  • From: Merk23literturbo@aol.com
• Re: [tuner23] Need information on back cutting valves
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Need information on back cutting valves
  • From: ASchleinig@aol.com
• [tuner23] Re: Using a PF3 in a 6 cylinder Application
  • From: bugzturbo@aol.com
• RE: [tuner23] Re: Using a PF3 in a 6 cylinder Application
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] dual air meters
  • From: "albin0" <jumpintodajungle@yahoo.com>
• [tuner23] RE: Re: Using a PF3 in a 6 cylinder Application
  • From: bugzturbo@aol.com
• [tuner23] huge table of fuel injector flow rates
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] Compensating for lack of EGR
  • From: "pureponcho" <maproctor@houston.rr.com>
• Re: [tuner23] RE: Re: Using a PF3 in a 6 cylinder Application
  • From: capri5oh@aol.com
• [tuner23] Re: Using a PF3 in a 6 cylinder Application
  • From: bugzturbo@aol.com
• [tuner23] 2.9L & 4.0l Turbo
  • From: "jakeflemingiii" <jakefleming@earthlink.net>
• [tuner23] Newbie needs help getting started.....
  • From: "mmmccreight" <mmmccreight@hotmail.com>
• [tuner23] RE: [xr4-hardcore] Keeping the system in closed loop
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Fw: RE: Ford EDIS question
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] 2001 FORD MUSTANG EEC COMPUTER WOW PICS!
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] Import Ford Show and Swap Meet
  • From: "Joseph Schesso" <product@pacifier.com>
• Re: [tuner23] Import Ford Show and Swap Meet
  • From: "Avanti" <duecento@AttBi.com>
• Re: [tuner23] Import Ford Show and Swap Meet
  • From: "Joseph Schesso" <product@pacifier.com>
• [tuner23] doing my dyno / result
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] Import Ford meet
  • From: "Dirk Nansen" <dirk@televar.com>
• [tuner23] PCMX software license...
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] PCMX software license...
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: [xr4-hardcore] Keeping the system in closed loop
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] PCMX software license...
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] Re: [xr4-hardcore] Keeping the system in closed loop
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] PCMX software license...
  • From: "Kevin Timmerman" <kevin_timmerman@yahoo.com>
• [tuner23] Re: [xr4-hardcore] Keeping the system in closed loop
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Re: PCMX software license...
  • From: "gsxr1970" <cosworth@shaw.ca>
• [tuner23] click and win fiesta = get:://everyone.to/thelink
  • From: "RECKON EMAIL" <reckno15@yahoo.com>
• [tuner23] Re: [xr4-hardcore] Keeping the system in closed loop
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] click and win fiesta = spam
  • From: mc2racing@aol.com
• Re: [tuner23] click and win fiesta = spam
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Fw: Contact info for Randy
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: LA2 VS LA3
  • From: "stevebeem" <stevebeem@yahoo.com>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "Steven Beem" <stevebeem@yahoo.com>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "Steven Beem" <stevebeem@yahoo.com>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] Re: LA2 VS LA3
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23]
  • From: "Tim M Hovey" <thovey@swbell.net>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "William A Williams" <bwmsbldr@juno.com>
• RE: [tuner23] Re: LA2 VS LA3
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "Steven Beem" <stevebeem@yahoo.com>
• RE: [tuner23] Re: LA2 VS LA3
  • From: "Steven Beem" <stevebeem@yahoo.com>
• [tuner23] Re: LA2 VS LA3
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] eec tuner reader ...
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] eec tuner reader ...
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] eec tuner reader ...
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• RE: [tuner23] eec tuner reader ...
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] eec tuner reader ...
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• RE: [tuner23] eec tuner reader ...
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] eec tuner reader ...
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• RE: [tuner23] eec tuner reader ...
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] Re: LA2 VS LA3
  • From: "Steven Beem" <stevebeem@yahoo.com>
• RE: [tuner23] eec tuner reader ...
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• RE: [tuner23] eec tuner reader ...
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] late model DIS computer
  • From: "bluekmart" <bluekmart@yahoo.com>
• [tuner23] Re: late model DIS computer
  • From: "lanceloader" <lloader@cox.net>
• RE: [tuner23] late model DIS computer
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Re: late model DIS computer
  • From: "bluekmart" <bluekmart@yahoo.com>
• Re: [tuner23] Re: late model DIS computer
  • From: "Dave Friske" <svtboy@yahoo.com>
• Re: [tuner23] Re: late model DIS computer
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] 300 ZX Bosch MAF Data Collection & Tuning
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• [tuner23] TPS / Big VAF Data points
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Jason Richardson" <groups@merkurboys.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Steve Meyer" <scm@bigfoot.com>
• [tuner23] PF3 vs. LA3
  • From: "Chris Schroeder" <chrisms_1973@yahoo.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Jason Richardson" <groups@merkurboys.com>
• [tuner23] Very useful credit info
  • From: "polalrsa" <polalrsa@yahoo.co.uk>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Jason Richardson" <groups@merkurboys.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Steve Meyer" <scm@bigfoot.com>
• Re: [tuner23] Very useful credit info
  • From: "Joe Thompson" <jthomp@merkur23.com>
• RE: [tuner23] Very useful credit info
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] Very useful credit info
  • From: mc2racing@aol.com
• [tuner23] Re: late model DIS computer
  • From: "bluekmart" <bluekmart@yahoo.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• Re: [tuner23] Re: late model DIS computer
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Compensating for lack of EGR
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Steve Meyer" <scm@bigfoot.com>
• Re: [tuner23] Compensating for lack of EGR
  • From: "Jason Richardson" <groups@merkurboys.com>
• [tuner23] Re: Compensating for lack of EGR
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Compensating for lack of EGR
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• [tuner23] some one make me a chip for me 86 svo!!!!!!!!
  • From: "mustangmikeg" <mustangmikeg@hotmail.com>
• [tuner23] Re: Compensating for lack of EGR
  • From: "haroldina" <harold@princessharold.net>
• Re: [tuner23] some one make me a chip for me 86 svo!!!!!!!!
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• [tuner23] Does Tuner23 have a website?
  • From: "msvorinich" <michael.a.svorinich@santafe.cc.fl.us>
• Re: [tuner23] some one make me a chip for me 86 svo!!!!!!!!
  • From: "George Searing" <gsearing@bellsouth.net>
• [tuner23] Stupid question on tuner memory
  • From: "fasturbo" <caroth@rothfam.com>
• [tuner23] Disabling the EGR
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Does Tuner23 have a website?
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] Re: Disabling the EGR
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Disabling the EGR
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] Re: Disabling the EGR
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Stupid question on tuner memory
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] question on tuner
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] Re: Disabling the EGR
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Disabling the EGR
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Disabling the EGR-Ranger
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Disabling the EGR-Ranger
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• Re: [tuner23] Re: Disabling the EGR-Ranger
  • From: "TimO" <hairballmt@mcn.net>
• [tuner23] Re: Disabling the EGR-Ranger
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Disabling the EGR-Ranger
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] injectors
  • From: thmanship@aol.com
• Re: [tuner23] question on tuner
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] question on tuner
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] Re: injectors
  • From: "fast88coupe" <thunder88@sympatico.ca>
• [tuner23] tuner probs
  • From: "xr400ti" <WADENVAL@EARTHLINK.NET>
• [tuner23] Re: Disabling the EGR-Ranger
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Disabling the EGR-Ranger
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] Tuner advice please
  • From: "turbo_g83" <turbo_g83@hotmail.com>
• Re: [tuner23] tuner probs
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Disabling the EGR-Ranger
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Disabling the EGR-Ranger
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] Re: Disabling the EGR-Ranger
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Disabling the EGR-Ranger
  • From: "XLTurbo2.3-Ranger" <egroups@z-m.com>
• [tuner23] Base Fuel Increase
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Base Fuel Increase
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Base Fuel Increase
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Base Fuel Increase
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Base Fuel Increase
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Re: Base Fuel Increase
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Base Fuel Increase
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• Re: [tuner23] Re: Base Fuel Increase
  • From: "Avanti" <duecento@AttBi.com>
• Re: [tuner23] Base Fuel Increase
  • From: "Steven Beem" <stevebeem@yahoo.com>
• [tuner23] Re: Base Fuel Increase #6 & #7
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Using the Boost Control Solenoid
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• Re: [tuner23] Re: Base Fuel Increase
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Base Fuel Increase
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Base Fuel Increase
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Base Fuel Increase #6 & #7
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] PE_MAF.bin question
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] Re: Base Fuel Increase
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: Base Fuel Increase #6 & #7
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Base Fuel Increase
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Base Fuel Increase #6 & #7
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Injector impedence???
  • From: "StrLegal" <strlegal@aol.com>
• [tuner23] FW: Effect of detonation on measured mixture
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] PE_MAF.bin question
  • From: "John Baas" <xr4tic@ameritech.net>
• [tuner23] Injector Pulsewidths
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Digest Number 398
  • From: "Carter Shore" <clshore@yahoo.com>
• [tuner23] Re: Injector Pulsewidths
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Data Cable
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] Data Cable
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Data Cable
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] Data Cable
  • From: "mmike mmccreight" <mmmccreight@hotmail.com>
• [tuner23] XR4Ti HP ratings
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Met someone who produced the EEC-IV
  • From: Merk23literturbo@aol.com
• Re: [tuner23] Met someone who produced the EEC-IV
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] XR4Ti HP ratings
  • From: ted.schaefer@mp.msl.com
• Re: [tuner23] Met someone who produced the EEC-IV
  • From: "Steve Meyer" <scm@bigfoot.com>
• Re: [tuner23] Met someone who produced the EEC-IV
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Met someone who produced the EEC-IV
  • From: Merk23literturbo@aol.com
• Re: [tuner23] Met someone who produced the EEC-IV
  • From: Merk23literturbo@aol.com
• RE: [tuner23] Met someone who produced the EEC-IV
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] magic wand
  • From: "Mary Bush" <marybush@go.com>
• Re: [tuner23] magic wand
  • From: mustang@tampabay.rr.com
• Re: [tuner23] magic wand
  • From: "Avanti" <duecento@AttBi.com>
• [tuner23] magic wand, who needs that? boostvalve it :-) [blatantplug] WOB
  • From: "Ric Gillis" <RicGillis@boostvalve.com>
• RE: [tuner23] boostvalve, who needs that!? Quad Conversion <BWOB>
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] magic wand
  • From: "Steve Meyer" <scm@bigfoot.com>
• Re: [tuner23] Met someone who produced the EEC-IV
  • From: ASchleinig@aol.com
• Re: [tuner23] magic wand, who needs that? boostvalve it :-) [blatantplug] WOB
  • From: "William A Williams" <bwmsbldr@juno.com>
• RE: [tuner23] magic wand
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• Re: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "TimO" <hairballmt@mcn.net>
• Re: [tuner23] Met someone who produced the EEC-IV
  • From: "Duecento" <duecento@AttBi.com>
• [tuner23] Re: Top of VAF Transfer Table - MAF Conversion
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• Re: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] TwEECer
  • From: "d" <dimswits@ix.netcom.com>
• Re: [tuner23] Re: Top of VAF Transfer Table - MAF Conversion
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Top of VAF Transfer Table - MAF Conversion
  • From: "Geoff Hemsley" <ghemsley@uswest.net>
• RE: [tuner23] TwEECer
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] Re: Top of VAF Transfer Table - MAF Conversion
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] EEC_PE.rdt
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• RE: [tuner23] TwEECer
  • From: "D" <dimswits@ix.netcom.com>
• [tuner23] Re: Top of VAF Transfer Table - MAF Conversion
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Top of VAF Transfer Table - MAF Conversion
  • From: "TimO" <hairballmt@mcn.net>
• [tuner23] What is the lastest Defintiion file for the LA3
  • From: "drlightspeed1" <drlightspeed@hotmail.com>
• RE: [tuner23] Code 15
  • From: "Boris Besedin" <bbesedin@siebel.com>
• Re: [tuner23] Code 15
  • From: Matthewy8@aol.com
• [tuner23] Re: Met someone who produced the EEC-IV
  • From: "fasturbo" <caroth@rothfam.com>
• [tuner23] Re: Met someone who produced the EEC-IV
  • From: "fasturbo" <caroth@rothfam.com>
• Re: [tuner23] Re: Met someone who produced the EEC-IV
  • From: "Steve Meyer" <scm@bigfoot.com>
• Re: [tuner23] EEC_PE.rdt
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Uploading calibration info from EEC tuner
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] 300ZX MAF Upgrade Update
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Re: Uploading calibration info from EEC tuner
  • From: "luxferro397" <luxferro397@yahoo.com>
• Re: [tuner23] Re: Uploading calibration info from EEC tuner
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Uploading calibration info from EEC tuner
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] INJECTOR SIZE CHANGE
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] INJECTOR SIZE CHANGE
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• RE: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "RS" <RS450@YAHOO.COM>
• RE: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "Boris Besedin" <bbesedin@siebel.com>
• RE: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "RS" <RS450@YAHOO.COM>
• RE: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] tuner not working
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] tuner not working
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] tuner not working
  • From: "michael krader" <mjkrader@yahoo.com>
• [tuner23] PE.rdt
  • From: "luxferro397" <luxferro397@yahoo.com>
• [tuner23] RE: fuel injectors
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] Re: 300ZX MAF Upgrade Update
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] bin file for a LB2?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] bin file for a LB2?
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] found LB2 bin file but now need more current L-series rdtfile for pcmx
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] bin file for a LB2?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• RE: [tuner23] Re: 300ZX MAF Upgrade Update
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] Data Cable - Home Solution
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• RE: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "Ric Gillis" <RicGillis@boostvalve.com>
• RE: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "Greg Pitz" <gregpitz@compsolv.com>
• [tuner23] VAT vs. Fuel Enrichment ??
  • From: "Allan" <a.slocum@mindspring.com>
• [tuner23] accelerator pump shot ??
  • From: "Allan" <a.slocum@mindspring.com>
• Re: [tuner23] Re: 300ZX MAF Upgrade Update
  • From: mustang@tampabay.rr.com
• RE: [tuner23] Re: 300ZX MAF Upgrade Update
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Re: 300ZX MAF Upgrade Update
  • From: "Steve Meyer" <scm@bigfoot.com>
• Re: [tuner23] Re: 300ZX MAF Upgrade Update
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Re: 300ZX MAF Upgrade Update
  • From: "Dan Stokes" <dstokes@coin.org>
• Re: [tuner23] bin file for a LB2?
  • From: "Steven Beem" <stevebeem@yahoo.com>
• [tuner23] Re: VAT vs. Fuel Enrichment ??
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] Re: 300ZX MAF Upgrade Update
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] bin file for a LB2?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Re: 300ZX MAF Upgrade Update
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• [tuner23] Re: 300ZX MAF Upgrade Update - over voltage
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Re: accelerator pump shot ??
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] Re: 300ZX MAF Upgrade Update - over voltage
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• Re: [tuner23] Re: accelerator pump shot ??
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] Re: accelerator pump shot ??
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] new motor pics and C4
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• [tuner23] Re: 300ZX MAF Upgrade Update - over voltage
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] new motor pics and C4
  • From: "Albino" <jumpintodajungle@yahoo.com>
• RE: [tuner23] Re: 300ZX MAF Upgrade Update - over voltage
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] Top of VAF Transfer Table - MAF Conversion
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• [tuner23] Re: Top of VAF Transfer Table - MAF Conversion
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Re: 300ZX MAF Upgrade Update - over voltage
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] Re: 300ZX MAF Upgrade Update - over voltage
  • From: "Dan Stokes" <dstokes@coin.org>
• RE: [tuner23] Re: 300ZX MAF Upgrade Update - over voltage
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] Re: 300ZX MAF Upgrade Update - over voltage
  • From: "Dan Stokes" <dstokes@coin.org>
• Re: [tuner23] Re: accelerator pump shot ??
  • From: "Steve Meyer" <scm@bigfoot.com>
• [tuner23] Re: pump shot
  • From: "Allan" <a.slocum@mindspring.com>
• [tuner23] IC on Ebay
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Need help understanding...
  • From: "mikeyfyr" <Mikeyfyr@aol.com>
• [tuner23] Re: Need help understanding..."base fuel"
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Need help understanding..."base fuel"
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• [tuner23] Re: Need help understanding..."base fuel"
  • From: "mikeyfyr" <Mikeyfyr@aol.com>
• [tuner23] Re: Need help understanding...
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Base Fuel Increase
  • From: "Avanti" <duecento@AttBi.com>
• Re: [tuner23] Re: Base Fuel Increase
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] FPR, Injectors, and Boost
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] FPR, Injectors, and Boost
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] FPR, Injectors, and Boost
  • From: Merk23literturbo@aol.com
• [tuner23] FP and injector flow rates
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] FPR, Injectors, and Boost
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• Re: [tuner23] FPR, Injectors, and Boost
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] FP and injector flow rates
  • From: "RS" <RS450@YAHOO.COM>
• [tuner23] quick important question
  • From: "euroford78" <thovey@swbell.net>
• Re: [tuner23] quick important question
  • From: "Steve Meyer" <scm@bigfoot.com>
• Re: [tuner23] FPR, Injectors, and Boost
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• Re: [tuner23] quick important question
  • From: "Jeffrey Engel" <jengeltx@yahoo.com>
• Re: [tuner23] quick important question
  • From: "William A Williams" <bwmsbldr@juno.com>
• Re: [tuner23] quick important question
  • From: sarcosis@sbcglobal.net
• [tuner23] MP Mass-air kit MAF voltage curve uploaded
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] MP Mass-air kit MAF voltage curve uploaded
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] quick important question
  • From: "Steven Beem" <stevebeem@yahoo.com>
• Re: [tuner23] MP Mass-air kit MAF voltage curve uploaded
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] quick important question
  • From: sarcosis@sbcglobal.net
• Re: [tuner23] quick important question
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] quick important question
  • From: sarcosis@sbcglobal.net
• [tuner23] Ignition questions
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Ignition questions - minimum ignition table
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Ignition questions
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Re: Ignition questions - minimum ignition table
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Ignition questions
  • From: "Dan Stokes" <dstokes@coin.org>
• [tuner23] How does one get an eec-tuner
  • From: "Susan E. Hall" <susan@sibylline.com>
• Re: [tuner23] How does one get an eec-tuner
  • From: "slash" <slash@worldwideis.net>
• [tuner23] automotosports cam?
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• RE: [tuner23] automotosports cam?
  • From: "Brad Anesi" <brad.anesi@netiq.com>
• RE: [tuner23] automotosports cam?
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] How does one get an eec-tuner
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] automotosports cam?
  • From: "Avanti" <duecento@AttBi.com>
• [tuner23] Re: automotosports cam - half a job?
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] automotosports cam?
  • From: "Greg Pitz" <gregpitz@compsolv.com>
• RE: [tuner23] automotosports cam?
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• Re: [tuner23] Re: automotosports cam - half a job?
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• RE: [tuner23] automotosports cam?
  • From: "Shidel Scott" <scott.shidel@siemens.com>
• Re: [tuner23] automotosports cam?
  • From: sarcosis@sbcglobal.net
• Re: [tuner23] How does one get an eec-tuner
  • From: "O. B. Stegall" <goodfun@panola.com>
• [tuner23] Re: How does one get an eec-tuner
  • From: "rs450" <RS450@YAHOO.COM>
• Re: [tuner23] Re: How does one get an eec-tuner
  • From: "O. B. Stegall" <goodfun@panola.com>
• Re: [tuner23] automotosports cam?
  • From: "Chad Hayes" <chaze3000@yahoo.com>
• RE: [tuner23] automotosports cam?
  • From: "Tim M Hovey" <thovey@swbell.net>
• Re: [tuner23] automotosports cam?
  • From: sarcosis@sbcglobal.net
• RE: [tuner23] automotosports cam?
  • From: "Tim M Hovey" <thovey@swbell.net>
• [tuner23] 35 lb/hr injector capabilities
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] 35 lb/hr injector capabilities
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] 35 lb/hr injector capabilities
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: 35 lb/hr injector capabilities
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: 35 lb/hr injector capabilities
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Premium or Part Throttle Ign Map
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Premium or Part Throttle Ign Map
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] 35 lb/hr injector capabilities
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] Re: Premium or Part Throttle Ign Map
  • From: "RS" <RS450@YAHOO.COM>
• Re: [tuner23] automotosports cam?
  • From: svotim@charter.net
• Re: [tuner23] automotosports cam?
  • From: "Ryan Mattson" <rmattson@merkur23.com>
• [tuner23] Cat Converter Needed in CA
  • From: "William A Williams" <bwmsbldr@juno.com>
• [tuner23] adjusting timing
  • From: "isklahcyrst77" <isklahcyrst77@yahoo.com>
• Re: [tuner23] adjusting timing
  • From: "Ted Schaefer" <ted.schaefer@msl.com>
• Re: [tuner23] adjusting timing
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] SoCal Dyno Day
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re:Dyno Day
  • From: Slaysman@aol.com
• [tuner23] Re: Just got my tuner, and it is kicking my butt. lol
  • From: "eville140" <Eville140@sigecom.net>
• [tuner23] Just got my tuner, and it is kicking my butt. lol
  • From: "eville140" <Eville140@sigecom.net>
• Re: [tuner23] Re: Just got my tuner, and it is kicking my butt. lol
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Datalogging?
  • From: Ryan Mattson <rmattson@merkur23.com>
• [tuner23] Wastegate
  • From: "turbomerk256" <crazystar256143@aol.com>
• [tuner23] timing
  • From: "isklahcyrst77" <isklahcyrst77@yahoo.com>
• Re: [tuner23] Wastegate
  • From: "slash" <slash@worldwideis.net>
• Re: [tuner23] Wastegate
  • From: jn100440@aol.com
• [tuner23] High idle...do I even need the IAB????
  • From: "eville140" <Eville140@sigecom.net>
• Re: [tuner23] timing
  • From: sarcosis@sbcglobal.net
• [tuner23] Re: Datalogging?
  • From: "rs450" <RS450@YAHOO.COM>
• [tuner23] Tuner Not Powering Up
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• Re: [tuner23] Tuner Not Powering Up
  • From: Dejan Cokic <DejanC@optonline.net>
• RE: [tuner23] Tuner Not Powering Up
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Tuner Not Powering Up
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Tuner Not Powering Up
  • From: Joe Thompson <jthomp@merkur23.com>
• Re: [tuner23] Tuner Not Powering Up
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Re: Tuner Not Powering Up
  • From: "rs450" <RS450@YAHOO.COM>
• RE: [tuner23] Re: Tuner Not Powering Up
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Tuner Not Powering Up
  • From: Ryan Mattson <rmattson@merkur23.com>
• [tuner23] Shift Light Project
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Shift Light Project
  • From: "rs450" <RS450@YAHOO.COM>
• Re: [tuner23] Re: Shift Light Project
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Tuner Not Powering Up
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Re: Datalogging?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Re: Shift Light Project
  • From: TimO <hairballmt@mcn.net>
• RE: [tuner23] Tuner Not Powering Up
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] Tuner Not Powering Up
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Tuner Not Powering Up
  • From: d <dimswits@ix.netcom.com>
• RE: [tuner23] Tuner Not Powering Up
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Shift Light Project
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] Tuner Not Powering Up
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: Shift Light Project
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Funky engine behavior
  • From: "bbesedin" <bbesedin@siebel.com>
• Re: [tuner23] Funky engine behavior
  • From: "Ted Schaefer" <ted.schaefer@msl.com>
• [tuner23] DANA
  • From: "crznwagn" <tkz35@suite224.net>
• [tuner23] Lots of newbe questions
  • From: BJ Tiemessen <boost999@yahoo.com>
• [tuner23] Newbe questions
  • From: BJ Tiemessen <gonzo99@holly.ColoState.EDU>
• [tuner23] Re: Newbe questions
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] injector sizing questions
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: [XR4-Xtreme] injector sizing questions
  • From: d <dimswits@ix.netcom.com>
• [tuner23] Shamless plug....
  • From: Shidel Scott <scott.shidel@siemens.com>
• [tuner23] Re: injector sizing questions - max duty cycle
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: injector sizing questions - max duty cycle
  • From: d <dimswits@ix.netcom.com>
• Re: [tuner23] injector sizing questions
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: injector sizing questions - max duty cycle
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] injector sizing questions
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] injector sizing questions
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] interest in a SouthEast dyno day?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] interest in a SouthEast dyno day?
  • From: Shidel Scott <scott.shidel@siemens.com>
• RE: [tuner23] interest in a SouthEast dyno day?
  • From: "Garriga, Manuel" <mgarriga@miami.edu>
• [tuner23] New Folder
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Shift Light Project
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Shift Light Project
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Shift Light Project
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re: SoCal Dyno Day
  • From: "rs450" <RS450@YAHOO.COM>
• [tuner23] need XR4Ti EEC loop.
  • From: "O. B. Stegall" <goodfun@panola.com>
• [tuner23] Re: Shift Light Project
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Shift Light Project
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Shift Light Project
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Shift Light Project
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] help need a good starting file
  • From: Chad Hayes <chaze3000@yahoo.com>
• [XR4-Xtreme] Re: [tuner23] help need a good starting file
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] help need a good starting file
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] help need a good starting file
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] help need a good starting file
  • From: sarcosis@sbcglobal.net
• Re: [tuner23] help need a good starting file
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [XR4-Xtreme] Re: [tuner23] help need a good starting file
  • From: "Rob Eddy" <reddy@copper.net>
• [tuner23] IS IT 4 ME
  • From: "turbojoe21012" <turbojoe21012@yahoo.com>
• RE: [tuner23] IS IT 4 ME
  • From: Tim M Hovey <thovey@swbell.net>
• Re: [tuner23] IS IT 4 ME
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] help need a good starting file
  • From: Chad Hayes <chaze3000@yahoo.com>
• [tuner23] PCMX software
  • From: Chad Hayes <chaze3000@yahoo.com>
• [tuner23] EEC-Tuner Tuning Notes Notes
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] PCMX software
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] EEC-Tuner Tuning Notes Notes
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] EEC-Tuner Tuning Notes Notes
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] PCMX software
  • From: Chad Hayes <chaze3000@yahoo.com>
• Re: [tuner23] PCMX software
  • From: sarcosis@sbcglobal.net
• Re: [tuner23] PCMX software
  • From: RS <RS450@YAHOO.COM>
• [tuner23] PCMX - Verify Calibration
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] QUESTION FOR RANDY
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] PCMX - Verify Calibration
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] QUESTION FOR RANDY
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] QUESTION FOR RANDY
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Can I loose my VAM by going with this tuner or tweecer?
  • From: "msvorinich" <michael.a.svorinich@santafe.cc.fl.us>
• [tuner23] Fooling the EEC
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Dealing with big injectors
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Fooling the EEC
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Can I loose my VAM by going with this tuner or tweecer?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Fooling the EEC
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Can I loose my VAM by going with this tuner or tweecer?
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Can I loose my VAM by going with this tuner or tweecer?
  • From: "Chris Hewitt-Haigh" <umhewit2@cc.umanitoba.ca>
• Re: [tuner23] Fooling the EEC
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Dealing with big injectors
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Can I loose my VAM by going with this tuner or tweecer?
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Fooling the EEC
  • From: "Duecento" <duecento@AttBi.com>
• [tuner23] .bin file needed
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] F_0C04
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] TUNING ADJUSTMENTS
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] Re: Function F_0C04 (PE)
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Fooling the EEC
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] TUNING ADJUSTMENTS
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] .bin file needed
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: Function F_0C04 (PE)
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] .bin file needed
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] .bin file needed
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] .bin file needed
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] .bin file needed
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Fooling the EEC
  • From: "Duecento" <duecento@AttBi.com>
• Re: [tuner23] Fooling the EEC
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Fooling the EEC
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Fooling the EEC
  • From: TimO <hairballmt@mcn.net>
• Re: [tuner23] Fooling the EEC
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Fooling the EEC
  • From: crazystar256143@aol.com
• [tuner23] How is the Nissan 3" maf conversions going??
  • From: "eville140" <Eville140@sigecom.net>
• [tuner23] Re: Fooling the EEC - fuel pressure
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Re: Fooling the EEC
  • From: Carter Shore <clshore@yahoo.com>
• [tuner23] SVO Package and Tuning
  • From: "twistednred" <fn_darkness@hotmail.com>
• [tuner23] Re: Met someone who produced the EEC-IV
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] eec tuner
  • From: "dale knapke" <daleknapke@hotmail.com>
• [tuner23] AMS Cam results and impressions
  • From: Ryan Mattson <rmattson@merkur23.com>
• Re: [tuner23] Fooling the EEC
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Load values and interpolation
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] How is the Nissan 3" maf conversions going??
  • From: Shidel Scott <scott.shidel@siemens.com>
• Re: [tuner23] How is the Nissan 3" maf conversions going??
  • From: "Eville140" <Eville140@sigecom.net>
• Re: [tuner23] Re: Met someone who produced the EEC-IV
  • From: Merk23literturbo@aol.com
• Re: [tuner23] SVO Package and Tuning
  • From: Merk23literturbo@aol.com
• Re: [tuner23] Re: Met someone who produced the EEC-IV
  • From: William A Williams <bwmsbldr@juno.com>
• RE: [tuner23] How is the Nissan 3" maf conversions going??
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] SVO Package and Tuning
  • From: "O. B. Stegall" <goodfun@panola.com>
• [tuner23] Re: Load values and interpolation
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Load values and interpolation
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] SVO Package and Tuning
  • From: Merk23literturbo@aol.com
• [tuner23] Turn a P series into a PE?
  • From: "OliverH750" <Oliver_H750@msn.com>
• Re: [tuner23] SVO Package and Tuning
  • From: "O. B. Stegall" <goodfun@panola.com>
• Re: [tuner23] Turn a P series into a PE?
  • From: "O. B. Stegall" <goodfun@panola.com>
• Re: [tuner23] SVO Package and Tuning
  • From: Merk23literturbo@aol.com
• Re: [tuner23] SVO Package and Tuning
  • From: fritzy666@webtv.net
• [tuner23] Re: Load values and interpolation
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] SVO Package and Tuning
  • From: Merk23literturbo@aol.com
• [tuner23] Re: SVO Package and Tuning
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: SVO Package and Tuning
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Turn a P series into a PE?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Turn a P series into a PE?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] SVO Package and Tuning
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] SVO Package and Tuning
  • From: "O. B. Stegall" <goodfun@panola.com>
• RE: [tuner23] Turn a P series into a PE?
  • From: "Oliver Harris" <Oliver_H750@msn.com>
• Re: [tuner23] SVO Package and Tuning
  • From: Merk23literturbo@aol.com
• Re: [tuner23] SVO Package and Tuning
  • From: Merk23literturbo@aol.com
• Re: [tuner23] SVO Package and Tuning
  • From: "Duecento" <duecento@AttBi.com>
• Re: [tuner23] SVO Package and Tuning
  • From: "Sam I Am" <xr5000@hotmail.com>
• Re: [tuner23] SVO Package and Tuning
  • From: Greg Pitz <gregpitz@compsolv.com>
• RE: [tuner23] SVO Package and Tuning
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• Re: [tuner23] SVO Package and Tuning
  • From: Merk23literturbo@aol.com
• Re: [tuner23] SVO Package and Tuning
  • From: Merk23literturbo@aol.com
• RE: [tuner23] SVO Package and Tuning
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• Re: [tuner23] SVO Package and Tuning
  • From: "O. B. Stegall" <goodfun@panola.com>
• Re: [tuner23] SVO Package and Tuning
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] SVO Package and Tuning
  • From: fritzy666@webtv.net
• Re: [tuner23] Re: Load values and interpolation
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Turn a P series into a PE?
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] SVO Package and Tuning
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• Re: [tuner23] SVO Package and Tuning
  • From: "Duecento" <duecento@AttBi.com>
• Re: [tuner23] Re: Load values and interpolation
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Turbo stud, nut and bolt hardware kits
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] SVO Package and Tuning
  • From: RS <RS450@YAHOO.COM>
• [tuner23] MAF conversion with a SHO meter
  • From: "fasturbo" <caroth@rothfam.com>
• RE: [tuner23] Turbo stud, nut and bolt hardware kits
  • From: Ellery Walker-Beckford <ewalker5@rci.rogers.com>
• Recall: [tuner23] Turbo stud, nut and bolt hardware kits
  • From: Ellery Walker-Beckford <ewalker5@rci.rogers.com>
• Re: [tuner23] MAF conversion with a SHO meter
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] MAF conversion with a SHO meter
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] MAF conversion with a SHO meter
  • From: Shidel Scott <scott.shidel@siemens.com>
• [tuner23] Re: MAF conversion with a SHO meter
  • From: "fasturbo" <caroth@rothfam.com>
• [tuner23] Rational fuel rationale?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Turbo stud, nut and bolt hardware kits
  • From: Chad Hayes <chaze3000@yahoo.com>
• Re: [tuner23] Rational fuel rationale?
  • From: RS <RS450@YAHOO.COM>
• [tuner23] adjustment for big vam.
  • From: "euroford78" <thovey@swbell.net>
• Re: [tuner23] adjustment for big vam.
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Re: adjustment for big vam.
  • From: "euroford78" <thovey@swbell.net>
• [tuner23] Re: adjustment for big vam.
  • From: "euroford78" <thovey@swbell.net>
• Re: [tuner23] Re: adjustment for big vam.
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: adjustment for big vam.
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] adjustment for big vam.
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: adjustment for big vam.
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: adjustment for big vam.
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Any tunability on the 2.9?
  • From: "Tony Vissoc" <tvissoc@team-v.net>
• Re: [tuner23] Re: adjustment for big vam.
  • From: "Sarcosis" <sarcosis@sbcglobal.net>
• RE: [tuner23] Re: adjustment for big vam.
  • From: Tim M Hovey <thovey@swbell.net>
• Re: [tuner23] Any tunability on the 2.9?
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] Any tunability on the 2.9?
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Any tunability on the 2.9?
  • From: "Tony Vissoc" <tvissoc@team-v.net>
• Re: [tuner23] Any tunability on the 2.9?
  • From: capri5oh@aol.com
• [tuner23] Re: Any tunability on the 2.9?
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] MAF CONVERSION 80mm 96cobra maf
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] EEC4 Monitor
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] EEC4 Monitor
  • From: mtykng@aol.com
• Re: [tuner23] Any tunability on the 2.9?
  • From: "tej1" <tej1@msn.com>
• [tuner23] AIR MASS TRANSFER FUNCTION
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] Idle lean Off Idle lean stumble
  • From: "mjkrader" <mjkrader@yahoo.com>
• RE: [tuner23] AIR MASS TRANSFER FUNCTION
  • From: Shidel Scott <scott.shidel@siemens.com>
• Re: [tuner23] Idle lean Off Idle lean stumble
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re: would like to buy a tuner for a Merkur Xr4ti
  • From: "Susan E. Hall" <susan@sibylline.com>
• Re: [tuner23] Any tunability on the 2.9?
  • From: "Sam I Am" <xr5000@hotmail.com>
• RE: [tuner23] Any tunability on the 2.9?
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] tuning disapointments on dyno today.
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] tuning disappointments on dyno today.
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] tuning disappointments on dyno today.
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: tuning disapointments on dyno today.
  • From: "rs450" <RS450@YAHOO.COM>
• Re: [tuner23] tuning disappointments on dyno today.
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Re: tuning disapointments on dyno today.
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] tuning disappointments on dyno today.
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Digest Number 461
  • From: "The Darkness`" <fn_darkness@hotmail.com>
• [tuner23] PCMX rdt
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] tuning disappointments on dyno today.
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Digest Number 461
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] tuning disappointments on dyno today.
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] PCMX rdt
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] tuning disappointments on dyno today.
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: PCMX rdt
  • From: "rs450" <RS450@YAHOO.COM>
• Re: [tuner23] Re: PCMX rdt
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: PCMX rdt
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Cam timing and backfires?
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Re: PCMX rdt
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] Re: PCMX rdt
  • From: Shidel Scott <scott.shidel@siemens.com>
• [tuner23] Cam timing and backfires?
  • From: "The Darkness`" <fn_darkness@hotmail.com>
• Re: [tuner23] Digest Number 464
  • From: "The Darkness`" <fn_darkness@hotmail.com>
• Re: [tuner23] Timing, oil, flirting with disaster, and digest replies
  • From: "Tony Vissoc" <tvissoc@team-v.net>
• [tuner23] Thanks
  • From: "The Darkness`" <fn_darkness@hotmail.com>
• [tuner23] Looking for BIG injectors
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] (unknown)
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Speed Density
  • From: RS <RS450@YAHOO.COM>
• [tuner23] FOUND THIS LAST NIGHT
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] FOUND THIS LAST NIGHT
  • From: Greg Pitz <gregpitz@compsolv.com>
• Re: [tuner23] Looking for BIG injectors
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] Looking for BIG injectors
  • From: "Alex Gracia" <neyo@nyc.rr.com>
• Re: [tuner23] Looking for BIG injectors
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] Looking for BIG injectors
  • From: "Alex Gracia" <neyo@nyc.rr.com>
• [tuner23] 255 LPH fuel pump for sale
  • From: bugzturbo@aol.com
• [tuner23] Pro-Flow mass air working with EEC Tuner & JB's mods
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Pro-Flow mass air working with EEC Tuner & JB's mods
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Pro-Flow mass air working with EEC Tuner & JB's mods
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Pro-Flow mass air working with EEC Tuner & JB's mods
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Pro-Flow mass air working with EEC Tuner & JB's mods
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] Pro-Flow mass air working with EEC Tuner & JB's mods
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Re: Pro-Flow mass air working with EEC Tuner & JB's mods
  • From: "xr4tic" <xr4tic@ameritech.net>
• [tuner23] mass air with EEC Tuner
  • From: RS <RS450@YAHOO.COM>
• [tuner23] how is function 0A58 Max VAF vs RPM used?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] how is function 0A58 Max VAF vs RPM used?
  • From: RS <RS450@YAHOO.COM>
• [tuner23] max mass air flow
  • From: "John Baas" <xr4tic@ameritech.net>
• [tuner23] What about VAF High & Low Limit parameters?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Pro-Flow mass air working with EEC Tuner & JB's mods
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] Pro-Flow mass air working with EEC Tuner & JB's mods
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Re: Datalogging?
  • From: michael krader <mjkrader@yahoo.com>
• [tuner23] Resend: mass air with EEC Tuner
  • From: "rs450" <RS450@YAHOO.COM>
• [tuner23] Re: Datalogging?
  • From: "rs450" <RS450@YAHOO.COM>
• [tuner23] Re: What about VAF High & Low Limit parameters?
  • From: "rs450" <RS450@YAHOO.COM>
• Re: [tuner23] Re: Datalogging?
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] Resend: mass air with EEC Tuner
  • From: "John Baas" <xr4tic@ameritech.net>
• RE: [tuner23] Re: What about VAF High & Low Limit parameters?
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Fw: [turbo] Palm pilot OBDII software!
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Re: What about VAF High & Low Limit parameters?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] where is idle assist disabled?
  • From: "gsxr1970" <cosworth@shaw.ca>
• Re: [tuner23] where is idle assist disabled?
  • From: RS <RS450@YAHOO.COM>
• [tuner23] FW: Factory Speed Density DP-headed Ranger
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Datalogging?
  • From: "rs450" <RS450@YAHOO.COM>
• [tuner23] Wiring Harness
  • From: Devon Harbord <dmhsgolf1@yahoo.com>
• [tuner23] Premium Spark Tables
  • From: "stevebeem" <stevebeem@yahoo.com>
• Re: [tuner23] Premium Spark Tables
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Spark Table Axis
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] Premium Spark Tables
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] LA3 vs LA2
  • From: "tr6turbo" <tr6turbo@hotmail.com>
• [tuner23] hesitation
  • From: "white_knight489" <white_knight489@yahoo.com>
• Re: [tuner23] Spark Table Axis
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Premium Spark Tables
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] LA3 vs LA2
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] LA3 vs LA2
  • From: RS <RS450@YAHOO.COM>
• [tuner23] tuning with the MAF transfer tables???
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] tuning with the MAF transfer tables???
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] tuning with the MAF transfer tables???
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] hesitation
  • From: James <jamessw@telus.net>
• [tuner23] Re: [XR4-Xtreme] WEB PAGE UPDATED: C4 TRANS(PLANT)
  • From: Chad Hayes <chaze3000@yahoo.com>
• [tuner23] Idea for Auburn Diff
  • From: Chad Hayes <chaze3000@yahoo.com>
• Re: [tuner23] Re: [XR4-Xtreme] WEB PAGE UPDATED: C4 TRANS(PLANT)
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• [tuner23] Re: [XR4-Xtreme] Idea for Auburn Diff
  • From: "ed209" <ed209@attbi.com>
• [tuner23] tried unsubscribing but it didnt work will someone helpme?
  • From: CLUBCRAFTGOLF@aol.com
• [tuner23] excellent EEC Tuner definitions page
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: WEB PAGE UPDATED: C4 TRANS(PLANT)
  • From: Edward Key <keyturbocars@yahoo.com>
• [tuner23] eec-tuner software
  • From: "mjkrader" <mjkrader@yahoo.com>
• RE: [tuner23] eec-tuner software
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] excellent EEC Tuner definitions page <Max MAF Voltage>
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] eec-tuner software
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] eec-tuner software
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] eec-tuner software
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] Spark Table Axis
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] LA3 vs LA2
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] Premium Spark Tables
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] base fuel la3 pcmx
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] Premium Spark Tables
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Premium Spark Tables
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] base fuel la3 pcmx
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Premium Spark Tables
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] base fuel la3 pcmx
  • From: michael krader <mjkrader@yahoo.com>
• [tuner23] Re: base fuel la3 pcmx
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Re: base fuel la3 pcmx
  • From: "rs450" <RS450@YAHOO.COM>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• [tuner23] Rapido SVO Plus Bin
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• [tuner23] Re: Rapido SVO Plus Bin
  • From: "rs450" <RS450@YAHOO.COM>
• [tuner23] ion sensing ignition tuning
  • From: "sac49091" <crisdresch@hotmail.com>
• Re: [tuner23] ion sensing ignition tuning
  • From: "Avanti" <duecento@AttBi.com>
• [tuner23] Re: ion sensing ignition tuning
  • From: "sac49091" <crisdresch@hotmail.com>
• [tuner23] Is there anyone in Louisiana or close that can tune???
  • From: "mk12us" <mblaw@bellsouth.net>
• [tuner23] where did everybody go
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] Need a Premium Switch
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Brad-like wild FI idea
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Brad-like wild FI idea
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• [tuner23] Re: Brad-like wild FI idea
  • From: "itsnoty2kstinky" <fordluvr@juno.com>
• [tuner23] BCS control & Water Injection?
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• RE: [tuner23] BCS control & Water Injection?
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: BCS control & Water Injection?
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• RE: [tuner23] Re: BCS control & Water Injection?
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• RE: [tuner23] Re: BCS control & Water Injection?
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: "Tony Vissoc" <tvissoc@team-v.net>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: "Tony Vissoc" <tvissoc@team-v.net>
• [tuner23] Re: BCS control & Water Injection?
  • From: "fordluvr76" <fordluvr@juno.com>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: "slash" <slash@worldwideis.net>
• Re: [tuner23] BCS control & Water Injection?
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] TwEECer vs EEC-Tuner
  • From: "fordluvr76" <fordluvr@juno.com>
• RE: [tuner23] TwEECer vs EEC-Tuner
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] TwEECer vs EEC-Tuner
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] TwEECer vs EEC-Tuner
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] TwEECer vs EEC-Tuner
  • From: d <dimswits@ix.netcom.com>
• [tuner23] Re: TwEECer vs EEC-Tuner
  • From: "fordluvr76" <fordluvr@juno.com>
• Re: [tuner23] BCS control & Water Injection?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: BCS control & Water Injection?
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• RE: [tuner23] BCS control & Water Injection?
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• [tuner23] Re: BCS control & Water Injection?
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• [tuner23] Re: BCS control & Water Injection?
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• [tuner23] Re: BCS control & Water Injection?
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: TwEECer vs EEC-Tuner
  • From: mc2racing@aol.com
• [tuner23] Re: TwEECer vs EEC-Tuner
  • From: "fordluvr76" <fordluvr@juno.com>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: mustang@tampabay.rr.com
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: William A Williams <bwmsbldr@juno.com>
• RE: [tuner23] Re: BCS control & Water Injection?
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: Greg Pitz <gregpitz@compsolv.com>
• RE: [tuner23] Re: BCS control & Water Injection?
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: Greg Pitz <gregpitz@compsolv.com>
• [tuner23] Re: BCS control & Water Injection?
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• [tuner23] Re: BCS control & Water Injection?
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] Re: BCS control & Water Injection?
  • From: Shidel Scott <scott.shidel@siemens.com>
• [tuner23] Re: BCS control & Water Injection?
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• Re[2]: [tuner23] Re: BCS control & Water Injection?
  • From: Fran <listmonkey@toughguy.net>
• [tuner23] Re: BCS control & Water Injection?
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• [tuner23] Re: BCS control & Water Injection?
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: mustang@tampabay.rr.com
• RE: [tuner23] Re: BCS control & Water Injection?
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• RE: [tuner23] Re: BCS control & Water Injection?
  • From: Shidel Scott <scott.shidel@siemens.com>
• RE: [tuner23] Re: BCS control & Water Injection?
  • From: Shidel Scott <scott.shidel@siemens.com>
• [tuner23] Determining Load
  • From: "sdc19x" <sdc19x@yahoo.com>
• Re: [tuner23] Determining Load
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: BCS control & Water Injection?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Open loop BCS control w/LA3 locations added
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] Determining Load
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Determining Load
  • From: "sdc19x" <sdc19x@yahoo.com>
• Re: [tuner23] Re: Determining Load
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Is there anyone in Louisiana or close that can tune???
  • From: "Jeremy" <Jeremy@in-touch.net>
• [tuner23] Verify Error?
  • From: "sdc19x" <sdc19x@yahoo.com>
• [tuner23] Looking to buy PCMX..Randy u still sell it?
  • From: Xchief1320@aol.com
• Re: [tuner23] Verify Error?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] For sale EEC-tuner.
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] For sale EEC-tuner.
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] check out this Ford Motorsports kit on E-bay
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Ford Motorsport Mass Air kit on E-bay
  • From: Steve Meyer <smeyer@socal.rr.com>
• [tuner23] For sale EEC-tuner.
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Verify Error?
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] For sale EEC-tuner.
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] For sale EEC-tuner.
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] For sale EEC-tuner.
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Re: Verify Error?
  • From: "sdc19x" <sdc19x@yahoo.com>
• [tuner23] Intelligent Water Control
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• [tuner23] slightly off topic question
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] slightly off topic question
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] Re: Verify Error?
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Randy..quick question
  • From: "xchief1320" <xchief1320@yahoo.com>
• Re: [tuner23] Randy..quick question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] slightly off topic question
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] slightly off topic question
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: For sale EEC-tuner.
  • From: "keyturbocars" <keyturbocars@yahoo.com>
• [tuner23] extreme race setup
  • From: "turbojoe21012" <turbojoe21012@yahoo.com>
• Re: [tuner23] extreme race setup
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Cossie/rally parts for sale
  • From: Jason Hollister <cosworth@shaw.ca>
• [tuner23] Re: Verify Error?
  • From: "rs450" <RS450@YAHOO.COM>
• [tuner23] Where can i find a LA3 Bin file?
  • From: "xchief1320" <xchief1320@yahoo.com>
• [tuner23] extreme race set up #2
  • From: "turbojoe21012" <turbojoe21012@yahoo.com>
• Re: [tuner23] Where can i find a LA3 Bin file?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] extreme race set up #2
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Where can i find a LA3 Bin file?
  • From: michael krader <mjkrader@yahoo.com>
• [tuner23] IAC Removal
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• [tuner23] extreme set up
  • From: "turbojoe21012" <turbojoe21012@yahoo.com>
• Re: [tuner23] Where can i find a LA3 Bin file?
  • From: Xchief1320@aol.com
• RE: [tuner23] IAC Removal
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• Re: [tuner23] extreme set up
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] IAC Removal
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] IAC Removal
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• RE: [tuner23] IAC Removal
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• RE: [tuner23] IAC Removal
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] IAC Removal
  • From: jeff@rangerpowersports.com
• RE: [tuner23] IAC Removal
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] IAC Removal
  • From: jeff@rangerpowersports.com
• RE: [tuner23] IAC Removal
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] IAC Removal
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] extreme set up
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] IAC Removal
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] IAC Removal
  • From: d <dimswits@ix.netcom.com>
• RE: [tuner23] IAC Removal
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• [tuner23] Fan temp on with PCMX?
  • From: "Martin Musial" <mjmusial@techport.com>
• [tuner23] Re: IAC Removal
  • From: "spl1384" <jeff@rangerpowersports.com>
• RE: [tuner23] Fan temp on with PCMX?
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] IAC Removal
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Re: IAC Removal
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] IAC Removal
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Fan temp on with PCMX?
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] extreme set up
  • From: joe poe <turbojoe21012@yahoo.com>
• Re: [tuner23] Re: IAC Removal
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] IAC Removal
  • From: fritzy666@webtv.net
• [tuner23] RE:IAC REMOVAL
  • From: "xr400ti" <WADENVAL@EARTHLINK.NET>
• [tuner23] Re: Fan temp on with PCMX?
  • From: "Martin Musial" <mjmusial@techport.com>
• [tuner23] Anyone planning on going to Petit LeMans?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• [tuner23] adding rows or columns to tables possible?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] "changing injector high & low slopes"?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] adding rows or columns to tables possible?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] "changing injector high & low slopes"?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23]
  • From: "Lee Eldridge" <EldridgeL@PowerLogic.com>
• RE: [tuner23]
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23]
  • From: jeff@rangerpowersports.com
• RE: [tuner23]
  • From: "Lee Eldridge" <EldridgeL@PowerLogic.com>
• RE: [tuner23]
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23]
  • From: "Lee Eldridge" <EldridgeL@PowerLogic.com>
• [tuner23] P_1479 Question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23]
  • From: "ed209" <ed209@attbi.com>
• [tuner23] Re: adding rows or columns to tables possible?
  • From: "rs450" <RS450@YAHOO.COM>
• [tuner23] Re: "changing injector high & low slopes"?
  • From: "rs450" <RS450@YAHOO.COM>
• Re: [tuner23] P_1479 Question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23]
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23]
  • From: "Lee Eldridge" <EldridgeL@PowerLogic.com>
• Re: [tuner23]
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23]
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] wrong assumptions persist, please correct
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] wrong assumptions persist, please correct
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] wrong assumptions persist, please correct
  • From: William A Williams <bwmsbldr@juno.com>
• RE: [tuner23] wrong assumptions persist, please correct
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] wrong assumptions persist, please correct
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] MAF Question - WAS wrong assumptions persist, pleasecorrect -
  • From: "Chris Hewitt-Haigh" <umhewit2@cc.umanitoba.ca>
• Re: [tuner23] wrong assumptions persist, please correct
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] MAF Question - WAS wrong assumptions persist, please correct -
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] New want to buy
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• [tuner23] Chugging at idle
  • From: "sdc19x" <sdc19x@yahoo.com>
• [tuner23] Starter Timing Table
  • From: "sdc19x" <sdc19x@yahoo.com>
• Re: [tuner23] Chugging at idle
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] MAF Question - WAS wrong assumptions persist, pleasecorrect -
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] wrong assumptions persist, please correct
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] New want to buy
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• Re: [tuner23] MAF Question
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] Re: Chugging at idle
  • From: "sdc19x" <sdc19x@yahoo.com>
• [tuner23] want to learn all i can about tuning before i jump in
  • From: "pyropete125" <pete@peterson.tc>
• Re: [tuner23] New want to buy
  • From: "Charlie Vinci" <cvincijr@hotmail.com>
• Re: [tuner23] New want to buy
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] want to learn all i can about tuning before i jumpin
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] New want to buy
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] New want to buy
  • From: "David Weiner" <barondw@worldnet.att.net>
• RE: [tuner23] New want to buy
  • From: Ryan Mattson <rmattson@merkur23.com>
• Re: [tuner23] New want to buy
  • From: "Charlie Vinci" <cvincijr@hotmail.com>
• Re: [tuner23] New want to buy
  • From: "Charlie Vinci" <cvincijr@hotmail.com>
• RE: [tuner23] New want to buy
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] New want to buy
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] New want to buy
  • From: "David Weiner" <barondw@worldnet.att.net>
• RE: [tuner23] New want to buy
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• RE: [tuner23] New want to buy
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] New want to buy
  • From: Scott Shidel <coolhandboost@yahoo.com>
• RE: [tuner23] New want to buy
  • From: Scott Shidel <coolhandboost@yahoo.com>
• RE: [tuner23] New want to buy
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• Re: [tuner23] New want to buy
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• [tuner23] meaning of pin 34 on P-series ECU?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] Rounding the numbers
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Rounding the numbers
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] Re: meaning of pin 34 on P-series ECU?
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: d <dimswits@ix.netcom.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: "slash" <slash@worldwideis.net>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] meaning of pin 34 on P-series ECU?
  • From: RS <RS450@YAHOO.COM>
• [tuner23] datalogging tuner
  • From: RS <RS450@YAHOO.COM>
• [tuner23] I've got Codes, Was: Meaning of pin 34...
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] 4 pot datalogging
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] meaning of pin 34 on P-series ECU?
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] LB2, LA2, LB3 and etc with EEC Tuner
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] LB2, LA2, LB3 and etc with EEC Tuner
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] LB2, LA2, LB3 and etc with EEC Tuner
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Effect of Change in Injector Size
  • From: "Jim Wirt" <jwirt@ucsd.edu>
• Re: [tuner23] Effect of Change in Injector Size
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Dyno delicious
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Horiba Lambda Checker
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Horiba Lambda Checker
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• Re: [tuner23] Horiba Lambda Checker
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Dyno delicious
  • From: "ICDP4TURBO" <mpe-7@worldnet.att.net>
• Re: [tuner23] Dyno delicious
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Dyno delicious
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Dyno delicious
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] New stuff in the files section
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Dyno delicious
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] .3187
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] .3187
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] LB2, LA2, LB3 and etc with EEC Tuner
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] Dyno delicious
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• Re: [tuner23] LB2, LA2, LB3 and etc with EEC Tuner
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Sig Ret same as ground?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Sig Ret same as ground?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Should I buy the tuner? A chip? or Perfect Power?
  • From: "cvincijr1" <cvincijr@hotmail.com>
• Re: [tuner23] Should I buy the tuner? A chip? or Perfect Power?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Should I buy the tuner? A chip? or Perfect Power?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Should I buy the tuner? A chip? or Perfect Power?
  • From: "slash" <slash@worldwideis.net>
• Re: [tuner23] Should I buy the tuner? A chip? or Perfect Power?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Tuning
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Tuning
  • From: Steve Meyer <smeyer@socal.rr.com>
• Re: [tuner23] Tuning
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] LB2, LA2, LB3 and etc with EEC Tuner
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] .3187
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• [tuner23] MAF adapter
  • From: "jengeltx" <jengeltx@yahoo.com>
• Re: [tuner23] MAF adapter
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] MAF adapter
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] MAF adapter
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] MAF adapter
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] MAF adapter
  • From: "John Baas" <xr4tic@ameritech.net>
• Re: [tuner23] MAF adapter
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] MAF adapter
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] MAF adapter
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] just a couple of questions
  • From: Pintoturbo@aol.com
• Re: [tuner23] MAF adapter
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] MAF adapter
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] just a couple of questions
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] MAF adapter
  • From: James <jamessw@telus.net>
• [tuner23] eec editor
  • From: "robertybowen" <rybowen@ucla.edu>
• Re: [tuner23] eec editor
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] MAF adapter
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Newbee
  • From: cuttinh2o@aol.com
• Re: [tuner23] Newbee
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Fw: MAF Recalibration
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Fw: MAF Recalibration
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Fw: MAF Recalibration
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Fw: MAF Recalibration
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Fw: MAF Recalibration
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Fw: MAF Recalibration
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Fw: MAF Recalibration
  • From: Scott Shidel <coolhandboost@yahoo.com>
• Re: [tuner23] Fw: MAF Recalibration
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Fw: MAF Recalibration
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] PCM Explorer
  • From: Hernani Luiz Vila <hvila@intercom.org.br>
• RE: [tuner23] PCM Explorer
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] PCM Explorer
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] PCM Explorer
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Fw: MAF Recalibration
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] PCM Explorer
  • From: Gtprototyp@aol.com
• [tuner23] Re: MAF Recalibration
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] Re: Fw: MAF Recalibration
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Fw: MAF Recalibration
  • From: Scott Shidel <coolhandboost@yahoo.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: Scott Shidel <coolhandboost@yahoo.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: Ryan Mattson <rmattson@merkur23.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: "Wendy Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] MAF Recalibration
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] MAF Recalibration
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] MAF Recalibration
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] Re: Fw: MAF Recalibration
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: MAF Recalibration
  • From: "Ed Hohenberg" <wolf@mts.net>
• Re: [tuner23] MAF Recalibration
  • From: "Noah Boehm" <theark1@twmi.rr.com>
• Re: [tuner23] Re: MAF Recalibration
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: Scott Shidel <coolhandboost@yahoo.com>
• Re: [tuner23] Re: MAF Recalibration
  • From: RS <RS450@YAHOO.COM>
• [tuner23] PF3 help
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Blow Through MAF?
  • From: Jake Ballard <subk@charter.net>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: Fang L Meister <fanglemeister@yahoo.com>
• [tuner23] Re: MAF Recalibration
  • From: "Ed Hohenberg" <wolf@mts.net>
• Re: [tuner23] MAF Recalibration
  • From: Fang L Meister <fanglemeister@yahoo.com>
• [tuner23] RE: Blow Through MAF?
  • From: "Hymbaugh, Mike" <mhymbaugh@hrgreen.com>
• RE: [tuner23] Blow Through MAF?
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• Re: [tuner23] Blow Through MAF?
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• [tuner23] Re: MAF Recalibration
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] More Conversion Queries
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Fw: MAF Recalibration
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: MAF Recalibration
  • From: "Ed Hohenberg" <wolf@mts.net>
• Re: [tuner23] Re: MAF Recalibration
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: MAF Recalibration
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] PF3 help
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] PF3 help
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: MAF Recalibration
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] PF3 help
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Re: PF3 help
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] What about max mass air flow?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] What about max mass air flow?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] For sale - 42 lb injectors
  • From: Cliff Walton <cliffxr@earthlink.net>
• [tuner23] looking for La3 program
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• Re: [tuner23] looking for La3 program
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Actual Injector PW
  • From: Ryan Mattson <rmattson@merkur23.com>
• [tuner23] uk spec eeciv tuning and emulators
  • From: "Mike Gurney" <mike_j_gurney@hotmail.com>
• [tuner23] meaning of trans type setting for NDS?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] meaning of trans type setting for NDS?
  • From: Kevin Timmerman <lists@pcmx.net>
• [tuner23] questions about meaning of terms
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] questions about meaning of terms
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] questions about meaning of terms
  • From: Pa6pa6roach6@aol.com
• [tuner23] more questions about meaning of terms
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] meaning of trans type setting for NDS?
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] Re: more questions about meaning of terms
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• [tuner23] MAF transfer table address parameter?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] BOOST Valve Type parameter?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] MAF transfer table address parameter?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] MAF transfer table address parameter?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] MAF transfer table address parameter?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] MAF transfer table address parameter?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] chuckle from the past (PCMX software gripes)
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] how long does keep alive memory stay alive?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] MAF transfer table address parameter?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] finding access point for VAF/MAF table
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: Ryan Mattson <rmattson@merkur23.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: d <dimswits@ix.netcom.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: mustang@tampabay.rr.com
• [tuner23] reading archived messages is very educational.
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: Kevin Timmerman <lists@pcmx.net>
• [tuner23] found access point for PE VAF/MAF table
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• Re: [tuner23] found access point for PE VAF/MAF table
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: "Jerod Harris" <mytkwik@hotmail.com>
• Re: [tuner23] found access point for PE VAF/MAF table
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] found access point for PE VAF/MAF table
  • From: Kevin Timmerman <lists@pcmx.net>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: Kevin Timmerman <lists@pcmx.net>
• Re: [tuner23] found access point for PE VAF/MAF table
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: found access point for PE VAF/MAF table
  • From: "rs450" <RS450@YAHOO.COM>
• Re: [tuner23] Kevin's reply & more questions
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Kevin's reply & more questions
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: found access point for PE VAF/MAF table
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: found access point for PE VAF/MAF table
  • From: "rs450" <RS450@YAHOO.COM>
• [tuner23] Re: found access point for PE VAF/MAF table
  • From: "qhap" <qhap@earthlink.net>
• Re: [tuner23] questions about meaning of terms
  • From: ghetto9809@aol.com
• Re: [tuner23] finding access point for VAF/MAF table
  • From: "Jerod Harris" <mytkwik@hotmail.com>
• Re: [tuner23] finding access point for VAF/MAF table
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] MAF Conversion fun
  • From: "rs450" <RS450@YAHOO.COM>
• Re: [tuner23] MAF Conversion fun
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] PK1/PE substitution
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] PK1/PE substitution
  • From: "Sarcosis" <sarcosis@sbcglobal.net>
• Re: [tuner23] MAF Conversion fun
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] PK1/PE substitution
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] PK1/PE substitution
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] MAF Conversion fun
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] PK1/PE substitution
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Tuner Causing Shear was pk1/pe sub
  • From: "Sarcosis" <sarcosis@sbcglobal.net>
• RE: [tuner23] MAF Conversion fun
  • From: Alexander Fernandes <Safado@pacbell.net>
• Re: [tuner23] MAF Conversion fun
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] MAF Conversion fun
  • From: "Sarcosis" <sarcosis@sbcglobal.net>
• Re: [tuner23] Tuner Causing Shear was pk1/pe sub
  • From: Chris Slaw <cslaw@ptd.net>
• Re: [tuner23] MAF Conversion fun
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] MAF Conversion fun
  • From: mustang@tampabay.rr.com
• [tuner23] It works!
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Tuner Causing Shear was pk1/pe sub
  • From: "Sarcosis" <sarcosis@sbcglobal.net>
• Re: [tuner23] Tuner Causing Shear was pk1/pe sub
  • From: "Mike" <baddad@teleport.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• Re: [tuner23] MAF Conversion fun
  • From: duecento@AttBi.com
• [tuner23] newbee WHERE TO START
  • From: "turbojoe21012" <joepoe302@hotmail.com>
• Re: [tuner23] New file uploaded to tuner23
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] new be me
  • From: "j. poe" <turbojoe21012@yahoo.com>
• [tuner23] It works even better!
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] It works even better!
  • From: "dsmnut" <dsmnut@attbi.com>
• Re: [tuner23] It works even better!
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] It works even better!
  • From: JOE P <turbojoe21012@yahoo.com>
• Re: [tuner23] It works even better!
  • From: "HARRY KING" <king67@peoplepc.com>
• Re: [tuner23] It works even better!
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: newbee WHERE TO START
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] It works even better!
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: newbee WHERE TO START
  • From: JOE P <turbojoe21012@yahoo.com>
• [tuner23] intakes
  • From: "j. poe" <turbojoe21012@yahoo.com>
• Re: [tuner23] flow sheet for Pro-M meter
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: Paging John Baas!
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] what tuner to use
  • From: r c <initialdproject@yahoo.ca>
• Re: [tuner23] what tuner to use
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] what tuner to use
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Re: flow sheet for Pro-M meter
  • From: "j. poe" <turbojoe21012@yahoo.com>
• Re: [tuner23] Re: flow sheet for Pro-M meter
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Re: flow sheet for Pro-M meter
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] Harness connectors, etc.
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Harness connectors, etc.
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Harness connectors, etc.
  • From: "Sarcosis" <sarcosis@sbcglobal.net>
• [tuner23] Re: what tuner to use
  • From: r c <initialdproject@yahoo.ca>
• Re: [tuner23] Re: what tuner to use
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: what tuner to use
  • From: "Mark Brahmer" <mbrahmer@pacbell.net>
• [tuner23] Adding MAF to my 85 2.3L TC?
  • From: "quickstang347" <sanderson@marshallnet.com>
• Re: [tuner23] Adding MAF to my 85 2.3L TC?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] New poll for tuner23
  • From: tuner23@yahoogroups.com
• Re: [tuner23] New poll for tuner23
  • From: mc2racing@aol.com
• Re: [tuner23] New poll for tuner23
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Fw: Re: Ford EECIV components
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] RE: Adding MAF to my 85 2.3L TC?
  • From: "Mike Hymbaugh" <mhymbaugh@huxcomm.net>
• Re: [tuner23] RE: Adding MAF to my 85 2.3L TC?
  • From: "Sarcosis" <sarcosis@sbcglobal.net>
• Re: [tuner23] Digest Number 549
  • From: ldavis9965@aol.com
• RE: [tuner23] Digest Number 549
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• [tuner23] xr4ti troubles
  • From: "shannon" <shannon_snow33@yahoo.com>
• Re: [tuner23] xr4ti troubles
  • From: jn100440@aol.com
• Re: [tuner23] xr4ti troubles
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] F_0FEE
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] F_0FEE
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23]
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] F_0FEE
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] F_0FEE
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23]
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] xr4ti troubles
  • From: "Sarcosis" <sarcosis@sbcglobal.net>
• RE: [tuner23] xr4ti troubles
  • From: Tim M Hovey <thovey@swbell.net>
• Re: [tuner23] xr4ti troubles
  • From: shannon snow <shannon_snow33@yahoo.com>
• Re: [tuner23] Adding MAF to my 85 2.3L TC?
  • From: Stafford Simmons <simmonsvi@yahoo.com>
• RE: [tuner23] F_0FEE
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] F_0FEE
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] xr4ti troubles
  • From: jn100440@aol.com
• Re: [tuner23] Digest Number 550
  • From: ldavis9965@aol.com
• Re: [tuner23] F_0FEE
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] F_0FEE
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] F_0FEE
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] F_0FEE
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] F_0FEE
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] F_0FEE
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] F_0FEE
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Re: F_0FEE - maf break points
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: F_0FEE - maf break points
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Connector Query
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Connector Query
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Connector Query
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Connector Query
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Connector Query
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• [tuner23] a way around the 56lb injector and the 511cfm VAF cap?
  • From: "phil" <pchadwick@gers.com>
• Re: [tuner23] a way around the 56lb injector and the 511cfm VAF cap?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Connector Query
  • From: "John Baas" <xr4tic@wideopenwest.com>
• Re: [tuner23] a way around the 56lb injector and the 511cfm VAF cap?
  • From: "John Baas" <xr4tic@wideopenwest.com>
• Re: [tuner23] a way around the 56lb injector and the 511cfm VAF cap?
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] Re: a way around the 56lb injector ?
  • From: "dcolvin_xr4" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] a way around the 56lb injector and the 511cfm VAF cap?
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• RE: [tuner23] a way around the 56lb injector and the 511cfm VAF cap?
  • From: d <dimswits@ix.netcom.com>
• Re: [tuner23] Re: a way around the 56lb injector ?
  • From: Dan Stokes <dstokes@coin.org>
• RE: [tuner23] a way around the 56lb injector and the 511cfm VAF cap?
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] Sticking IAC
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] Sticking IAC
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Sticking IAC
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] Sticking IAC
  • From: "Mark Brahmer" <mbrahmer@pacbell.net>
• Re: [tuner23] Sticking IAC
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Sticking IAC
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] New guy here...have questions....
  • From: "tomak01 <tomakicovic@shaw.ca>" <tomakicovic@shaw.ca>
• [tuner23] Newbie questions....
  • From: "tomak01 <tomakicovic@shaw.ca>" <tomakicovic@shaw.ca>
• [tuner23] inj. colors
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• [tuner23] Re: Sticking IAC
  • From: "cozz4ever <cozz.home@verizon.net>" <cozz.home@verizon.net>
• Re: [tuner23] Newbie questions....
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] inj. colors
  • From: "Chris Hewitt-Haigh" <umhewit2@cc.umanitoba.ca>
• Re: [tuner23] New guy here...have questions....
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Tuner time
  • From: Kurt Gugisberg <kurtgug@earthlink.net>
• Re: [tuner23] Re: Sticking IAC
  • From: "don alcorn" <dalcorn@leaco.net>
• Re: [tuner23] Re: Sticking IAC
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] readdy to buy
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• [tuner23] Making hex changes
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Making hex changes
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Making hex changes
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: Sticking IAC
  • From: duecento@AttBi.com
• Re: [tuner23] readdy to buy
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• Re: [tuner23] Making hex changes
  • From: Kevin Timmerman <lists@pcmx.net>
• Re: [tuner23] Making hex changes
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re: max kg/hr limit
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: Sticking IAC
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] turbos
  • From: "shannon <shannon_snow33@yahoo.com>" <shannon_snow33@yahoo.com>
• RE: [tuner23] turbos
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• Re: [tuner23] Making hex changes
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: max kg/hr limit
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] Re: max kg/hr limit
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] MD AREA
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• Re: [tuner23] MD AREA
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: max kg/hr limit
  • From: "dcolvin_xr4 <dcolvin_xr4@yahoo.com>" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] Re: max kg/hr limit
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: max kg/hr limit
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] turbos
  • From: Chris Slaw <cslaw@ptd.net>
• Re: [tuner23] Re: max kg/hr limit
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] MD AREA
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: max kg/hr limit
  • From: "dcolvin_xr4 <dcolvin_xr4@yahoo.com>" <dcolvin_xr4@yahoo.com>
• [tuner23] Raising the rev limiter...
  • From: "Marcin Olczyk" <euroxr@wp.pl>
• Re: [tuner23] Re: max kg/hr limit
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: max kg/hr limit
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re: Sticking IAC
  • From: "dcolvin_xr4 <dcolvin_xr4@yahoo.com>" <dcolvin_xr4@yahoo.com>
• [tuner23] It works!!! (OK, at least it idles)
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Raising the rev limiter...
  • From: "dan_xr4 <dcolvin_xr4@yahoo.com>" <dcolvin_xr4@yahoo.com>
• Re: [tuner23] MD AREA
  • From: JOE P <turbojoe21012@yahoo.com>
• [tuner23] Spam for a good cause
  • From: bugzturbo@aol.com
• [tuner23] Code 15?????
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] VAF OR MAF
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• [tuner23] We need some BIG help getting our fuel straightened out.
  • From: "tim hovey <thovey@swbell.net>" <thovey@swbell.net>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• Re: [tuner23] We need some BIG help getting our fuel straightenedout.
  • From: "Jake Ballard" <subk@charter.net>
• [tuner23] file section
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• RE: [tuner23] file section
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] VAF OR MAF
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] We need some BIG help getting our fuel straightenedout.
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] We need some BIG help getting our fuel straightenedout.
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• [tuner23] Re: We need some BIG help getting our fuel straightenedout.
  • From: "tim hovey <thovey@swbell.net>" <thovey@swbell.net>
• Re: [tuner23] Re: We need some BIG help getting our fuel straightenedout.
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] Re: We need some BIG help getting our fuel straightenedout.
  • From: Tim M Hovey <thovey@swbell.net>
• [tuner23] Re: We need some BIG help getting our fuel straightenedout.
  • From: "dan_xr4 <dcolvin_xr4@yahoo.com>" <dcolvin_xr4@yahoo.com>
• RE: [tuner23] file section
  • From: JOE P <turbojoe21012@yahoo.com>
• Re: [tuner23] VAF OR MAF
  • From: JOE P <turbojoe21012@yahoo.com>
• RE: [tuner23] file section
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] file section
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] VAF OR MAF
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Fuel Injectors
  • From: "merkurlover2000 <merkurlover@hotmail.com>" <merkurlover@hotmail.com>
• Re: [tuner23] VAF OR MAF
  • From: JOE P <turbojoe21012@yahoo.com>
• Re: [tuner23] Fuel Injectors
  • From: john doedoe <sbeemturbo@yahoo.com>
• RE: [tuner23] Fuel Injectors
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Fuel Injectors
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Fuel Injectors
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Fuel Injectors
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Fuel Injectors
  • From: "Sarcosis" <sarcosis@sbcglobal.net>
• [tuner23] VAT out of spec . . . But why?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: VAT out of spec . . . But why?
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Re: VAT out of spec . . . But why?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Fuel Injectors
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• Re: [tuner23] Fuel Injectors
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] Sorry
  • From: "merkurlover2000 <merkurlover@hotmail.com>" <merkurlover@hotmail.com>
• [tuner23] Re: fuel injectors
  • From: Robert Bowen <rybowen@ucla.edu>
• [tuner23] Admin - Tuner23 List Policies and Polls
  • From: mc2racing@aol.com
• RE: [tuner23] Re: fuel injectors
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Sorry
  • From: Chris Slaw <cslaw@ptd.net>
• [tuner23] New injectors where to set it.
  • From: "maxboosteric <maxboosteric@hotmail.com>" <maxboosteric@hotmail.com>
• [tuner23] Still Puzzled
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Still Puzzled
  • From: "barry deane" <barrydeane@hotmail.com>
• Re: [tuner23] Still Puzzled
  • From: "Duecento" <duecento@AttBi.com>
• [tuner23] Re: Still Puzzled
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Still Puzzled
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Detonation Sensor Values?
  • From: "Neil Emiro" <neil@ndperformance.com>
• [tuner23] VAM/Load value question
  • From: "Neil Emiro" <neil@ndperformance.com>
• RE: [tuner23] Still Puzzled <VAT Vs. IAT/ACT>
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] New injectors where to set it.
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Still Puzzled <VAT Vs. IAT/ACT>
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Sorry
  • From: jeff@rangerpowersports.com
• Re: [tuner23] Sorry
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Detonation Sensor Values?
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Re: Detonation Sensor Values?
  • From: "Neil Emiro" <neil@ndperformance.com>
• Re: [tuner23] Re: Detonation Sensor Values?
  • From: "Neil Emiro" <neil@ndperformance.com>
• [tuner23] MAF INFO
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• Re: [tuner23] VAM/Load value question
  • From: "barry deane" <barrydeane@hotmail.com>
• Re: [tuner23] VAM/Load value question
  • From: "Neil Emiro" <neil@ndperformance.com>
• [tuner23] Re: Detonation Sensor Values?
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Re: Detonation Sensor Values?
  • From: "Neil Emiro" <neil@ndperformance.com>
• Re: [tuner23] MAF INFO
  • From: Chris Slaw <cslaw@ptd.net>
• [tuner23] Re: New injectors where to set it.
  • From: "maxboosteric <maxboosteric@hotmail.com>" <maxboosteric@hotmail.com>
• [tuner23] Re: Still Puzzled <VAT Vs. IAT/ACT>
  • From: "dpdisxr4ti <brad.anesi@netiq.com>" <brad.anesi@netiq.com>
• Re: [tuner23] Re: Still Puzzled <VAT Vs. IAT/ACT>
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Even MORE Puzzling
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Even MORE Puzzling
  • From: Kevin Timmerman <lists@pcmx.net>
• Re: [tuner23] Even MORE Puzzling
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Even MORE Puzzling
  • From: Kevin Timmerman <lists@pcmx.net>
• [tuner23] Re: Still Puzzled <VAT Vs. IAT/ACT>
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Even MORE Puzzling
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Even MORE Puzzling
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Even MORE Puzzling
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Re: Even MORE Puzzling
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Re: Even MORE Puzzling
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Even MORE Puzzling
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Ford ACT/IAT/ECT
  • From: Carter Shore <clshore@yahoo.com>
• RE: [tuner23] Re: Even MORE Puzzling
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] Even MORE Puzzling
  • From: "barry deane" <barrydeane@hotmail.com>
• [tuner23] maf conversion
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• [tuner23] wierd accel problem solved
  • From: James <jamessw@telus.net>
• Re: [tuner23] Even MORE Puzzling
  • From: "Wendy Proctor" <maproctor@houston.rr.com>
• [tuner23] 150# injectors F/S
  • From: bugzturbo@aol.com
• [tuner23] Re: maf conversion
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• [tuner23] pf3 maf download
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• RE: [tuner23] Re: Even MORE Puzzling
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: maf conversion
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• Re: [tuner23] pf3 maf download
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: Even MORE Puzzling
  • From: "dpdisxr4ti <brad.anesi@netiq.com>" <brad.anesi@netiq.com>
• [tuner23] Re: maf conversion
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• RE: [tuner23] Re: maf conversion
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] basics
  • From: swartz jonathon <jonathon64485@yahoo.com>
• [tuner23] T5 tranny mount
  • From: Dejan Cokic <DejanC@optonline.net>
• Re: [tuner23] Re: Even MORE Puzzling
  • From: "Wendy Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] T5 tranny mount
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] T5 tranny mount
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Re: Even MORE Puzzling
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Merk23literturbo@aol.com
• RE: [tuner23] Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Merk23literturbo@aol.com
• [tuner23] Mass Air Conversion?
  • From: "mlah1234 <mlah1234@yahoo.com>" <mlah1234@yahoo.com>
• [tuner23] Re: Mass Air Conversion?
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• [tuner23] Idle Issue
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Idle Issue
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Idle Issue
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re: Idle Issue
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Idle Issue
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Idle Issue
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Idle Issue
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Re: Idle Issue
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Idle Issue
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] timed out
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• Re: [tuner23] timed out
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Idle Issue
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] timed out
  • From: JOE P <turbojoe21012@yahoo.com>
• RE: [tuner23] timed out
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Re: Idle Issue
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] timed out
  • From: JOE P <turbojoe21012@yahoo.com>
• RE: [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Idle Issue
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Idle Issue
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Idle Issue
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• RE: [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: "rs450 <RS450@YAHOO.COM>" <RS450@YAHOO.COM>
• Re: [tuner23] pf3 maf download
  • From: William A Williams <bwmsbldr@juno.com>
• RE: [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Brad Anesi <brad.anesi@netiq.com>
• Fwd: RE: [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Pro-Flow Oddity?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: pf3 maf download
  • From: "Ed Hohenberg <wolf@mts.net>" <wolf@mts.net>
• [tuner23] Re: Idle Issue
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• Re: [tuner23] Pro-Flow Oddity?
  • From: Chris Slaw <cslaw@ptd.net>
• [tuner23] Lighting maf meter
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• [tuner23] Re: Lighting maf meter
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• [tuner23] VAT vs. ACT was: Even MORE Puzzling
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• Re: [tuner23] VAT vs. ACT was: Even MORE Puzzling
  • From: Kevin Timmerman <lists@pcmx.net>
• [tuner23] Re: Idea Factory
  • From: Allan <aslocum@adelphia.net>
• Re: [tuner23] VAT vs. ACT was: Even MORE Puzzling
  • From: "John Baas" <xr4tic@wideopenwest.com>
• Re: [tuner23] VAT vs. ACT was: Even MORE Puzzling
  • From: Kevin Timmerman <lists@pcmx.net>
• Re: [tuner23] Lighting maf meter
  • From: "C. Slaw" <cslaw@ptd.net>
• [tuner23] Re: Lighting maf meter
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• Re: [tuner23] Re: Lighting maf meter
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Standard day?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Standard day?
  • From: "Geoff Hemsley" <geoffhemsley@gtcinternet.com>
• Re: [tuner23] Standard day?
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Re: Standard day?
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• [tuner23] Re: VAT vs. ACT was: Even MORE Puzzling
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• [tuner23] Re: VAT vs. ACT was: Even MORE Puzzling
  • From: "dpdisxr4ti <brad.anesi@netiq.com>" <brad.anesi@netiq.com>
• Re: [tuner23] Re: VAT vs. ACT was: Even MORE Puzzling
  • From: Kevin Timmerman <lists@pcmx.net>
• [tuner23] Re: VAT vs. ACT was: Even MORE Puzzling
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• Re: [tuner23] Standard day?
  • From: "HARRY KING" <king67@peoplepc.com>
• Re: [tuner23] Re: Lighting maf meter
  • From: "C. Slaw" <cslaw@ptd.net>
• RE: [tuner23] Re: VAT vs. ACT was: Even MORE Puzzling
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] VAT vs. ACT was: Even MORE Puzzling
  • From: "John Baas" <xr4tic@wideopenwest.com>
• Re: [tuner23] Even MORE Puzzling
  • From: Kevin Timmerman <lists@pcmx.net>
• [tuner23] Re: VAT vs. ACT was: Even MORE Puzzling
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• [tuner23] Re: Even MORE Puzzling
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• [tuner23] Re: Even MORE Puzzling
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• [tuner23] Max MAF and Load
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• [tuner23] Re: Max MAF and Load
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• RE: [tuner23] Re: VAT vs. ACT was: Even MORE Puzzling
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Re: Max MAF and Load
  • From: "John Baas" <xr4tic@wideopenwest.com>
• [tuner23] Re: Max MAF and Load
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• [tuner23] maf air mass transfur
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• Re: [tuner23] Re: Max MAF and Load
  • From: "John Baas" <xr4tic@wideopenwest.com>
• [tuner23] Re: Max MAF and Load
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Re: Max MAF and Load
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] maf air mass transfur
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re: Even MORE Puzzling
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• [tuner23] P_0408
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Power supply...
  • From: Jason Hollister <cosworth@shaw.ca>
• [tuner23] Re: P_0408
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• [tuner23] Setting min TPS...
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• [tuner23] ACT resistance vs. temp.....
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• [tuner23] Re: Setting min TPS...
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• [tuner23] Good electrial info link
  • From: Merk23literturbo@aol.com
• [tuner23] Re: ACT resistance vs. temp.....
  • From: "Ed Hohenberg <wolf@mts.net>" <wolf@mts.net>
• Re: [tuner23] Re: ACT resistance vs. temp.....
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] harness connectors??
  • From: Robert Bowen <rybowen@ucla.edu>
• Re: [tuner23] harness connectors??
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• [tuner23] Fire Away!!!!!
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Idle Issue
  • From: Chad Hayes <chaze3000@yahoo.com>
• Re: [tuner23] Idle Issue
  • From: "John Baas" <xr4tic@wideopenwest.com>
• [tuner23] Tuning the MAF transfer curve.....
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• RE: [tuner23] Tuning the MAF transfer curve.....
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Tuning the MAF transfer curve.....
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] Tuning the MAF transfer curve.....
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] Tuning the MAF transfer curve.....
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] Tuning the MAF transfer curve.....
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Tuning the MAF transfer curve.....
  • From: xr4tic@wideopenwest.com
• Re: [tuner23] Tuning the MAF transfer curve.....
  • From: xr4tic@wideopenwest.com
• RE: [tuner23] Tuning the MAF transfer curve.....
  • From: xr4tic@wideopenwest.com
• RE: [tuner23] Tuning the MAF transfer curve.....
  • From: xr4tic@wideopenwest.com
• RE: [tuner23] Tuning the MAF transfer curve.....
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Tuning the MAF transfer curve.....
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Tuning the MAF transfer curve.....
  • From: "John Baas" <xr4tic@wideopenwest.com>
• Re: [tuner23] Tuning the MAF transfer curve.....
  • From: "John Baas" <xr4tic@wideopenwest.com>
• [tuner23] Mass air for dummies?????
  • From: Chad Hayes <chaze3000@yahoo.com>
• [tuner23] Re: Mass air for dummies?????
  • From: "John Baas <xr4tic@wideopenwest.com>" <xr4tic@wideopenwest.com>
• Re: [tuner23] Re: Mass air for dummies?????
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Tuning the MAF transfer curve.....
  • From: "Harry King" <king67@peoplepc.com>
• [tuner23] OT question
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] OT question
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] OT question
  • From: "Wendy Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Tuning the MAF transfer curve.....
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] OT question
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] OT question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] OT question
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] OT question
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] 3 bar map ?'s
  • From: "msvorinich <michael.a.svorinich@santafe.cc.fl.us>" <michael.a.svorinich@santafe.cc.fl.us>
• Re: [tuner23] OT question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] OT question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] 3 bar map ?'s
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] OT question
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] OT question
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] OT question
  • From: "Duecento" <duecento@AttBi.com>
• Re: [tuner23] OT question
  • From: "Duecento" <duecento@AttBi.com>
• Re: [tuner23] OT question
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] OT question
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Re: Mass air for dummies?????
  • From: "Jason Hollister <cosworth@shaw.ca>" <cosworth@shaw.ca>
• Re: [tuner23] Re: Mass air for dummies?????
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Mass air for dummies?????
  • From: "Jason Hollister <cosworth@shaw.ca>" <cosworth@shaw.ca>
• Re: [tuner23] OT question
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] IAC ?
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• Re: [tuner23] IAC ?
  • From: jeff@rangerpowersports.com
• Re: [tuner23] IAC ?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] IAC ?
  • From: JOE P <turbojoe21012@yahoo.com>
• RE: [tuner23] IAC ?
  • From: "Geoff Hemsley" <ghemsley@qwest.net>
• RE: [tuner23] IAC ?
  • From: JOE P <turbojoe21012@yahoo.com>
• Re: [tuner23] IAC ?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] IAC ?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] IAC ?
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] IAC ?
  • From: "Geoff Hemsley" <ghemsley@qwest.net>
• [tuner23] slight bog on full throtle. help
  • From: "ahmad <ahmadbeig@yahoo.com>" <ahmadbeig@yahoo.com>
• Re: [tuner23] IAC ?
  • From: "Chris Darus" <chrisdarus@syrupcity.net>
• [tuner23] IAC ?
  • From: James <jamessw@telus.net>
• RE: [tuner23] slight bog on full throtle. help
  • From: "Geoff Hemsley" <ghemsley@qwest.net>
• Re: [tuner23] slight bog on full throtle. help
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Initial Tuner Setup Questions
  • From: "dpdisxr4ti <brad.anesi@netiq.com>" <brad.anesi@netiq.com>
• Re: [tuner23] Initial Tuner Setup Questions
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] MAF 4 DUMMIES ?
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• RE: [tuner23] Initial Tuner Setup Questions
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Initial Tuner Setup Questions
  • From: "John Baas" <xr4tic@wideopenwest.com>
• Re: [tuner23] MAF 4 DUMMIES ?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] MAF 4 DUMMIES ?
  • From: JOE P <turbojoe21012@yahoo.com>
• Re: [tuner23] MAF 4 DUMMIES ?
  • From: JOE P <turbojoe21012@yahoo.com>
• RE: [tuner23] Initial Tuner Setup Questions
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Initial Tuner Setup Questions
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] MAF 4 DUMMIES ?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Initial Tuner Setup Questions
  • From: RS <RS450@YAHOO.COM>
• [tuner23] data logging
  • From: "j. poe <turbojoe21012@yahoo.com>" <turbojoe21012@yahoo.com>
• [tuner23] MAF pull datalog
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] MAF pull datalog
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] MAF pull datalog
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] OT question
  • From: Chad Hayes <chaze3000@yahoo.com>
• [tuner23] Little help
  • From: "Rob <completleyincomplete@yahoo.com>" <completleyincomplete@yahoo.com>
• Re: [tuner23] Little help
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] Little help
  • From: "HARRY KING" <king67@peoplepc.com>
• [tuner23] P_05C3 and P_05C4 vis a vis P_1603 and P_160E
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: P_05C3 and P_05C4 vis a vis P_1603 and P_160E
  • From: "dan_xr4 <dan_xr4ti@yahoo.com>" <dan_xr4ti@yahoo.com>
• [tuner23] Pricing on tuner/PCMX
  • From: "haroldina" <harold@princessharold.net>
• [tuner23] Web page
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] wiring question
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Re: Web page
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Re: Web page
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] eec tuner for sale on ebay
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] eec tuner for sale on ebay
  • From: "R. Wall" <ricky@pro-formance.com>
• Re: [tuner23] Pricing on tuner/PCMX
  • From: "R.Wall" <ricky@pro-formance.com>
• [tuner23] Data logging
  • From: D Rogers <dvcrogers@yahoo.com>
• [tuner23] eec-tuner on PE
  • From: "hptoyz" <jpaulfenn@msn.com>
• [tuner23] la3 pin #54
  • From: "lns4667" <lns4667@msn.com>
• [tuner23] cutting prob
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• [tuner23] SDS or LA3 with tuner
  • From: "Lee" <dxrcivic89@yahoo.com>
• Re: [tuner23] eec tuner for sale on ebay
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] Data logging
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] eec tuner for sale on ebay
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] cutting prob
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] cutting prob
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] MAF question
  • From: "tej86svo" <tej1@msn.com>
• Re: [tuner23] MAF question
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: la3 pin #54
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] MAF question
  • From: "tej1 JOHNSON" <tej1@msn.com>
• Re: [tuner23] MAF question
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Tuner for sale
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• [tuner23] Re: SDS or LA3 with tuner
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Re: SDS or LA3 with tuner
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: SDS or LA3 with tuner
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] Re: SDS or LA3 with tuner
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: SDS or LA3 with tuner
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: SDS or LA3 with tuner
  • From: "HARRY KING" <king67@peoplepc.com>
• Re: [tuner23] Re: SDS or LA3 with tuner
  • From: Lee Reid <dxrcivic89@yahoo.com>
• [tuner23] My tuner
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• [tuner23] Re: mass air flow rate to horsepower conversion
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Re: mass air flow rate to horsepower conversion
  • From: "HARRY KING" <king67@peoplepc.com>
• Re: [tuner23] Re: mass air flow rate to horsepower conversion
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: mass air flow rate to horsepower conversion
  • From: "Harry King" <king67@peoplepc.com>
• [tuner23] 5.0 MAF cross-reference
  • From: "haroldina" <harold@princessharold.net>
• RE: [tuner23] 5.0 MAF cross-reference
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] 5.0 MAF cross-reference
  • From: "R. Wall" <ricky@pro-formance.com>
• [tuner23] Re: 5.0 MAF cross-reference
  • From: "haroldina" <harold@princessharold.net>
• RE: [tuner23] Re: 5.0 MAF cross-reference
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] la3?
  • From: "Rob" <completleyincomplete@yahoo.com>
• Re: [tuner23] la3?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] la3?
  • From: Merk23literturbo@aol.com
• [tuner23] Bad day at the dyno
  • From: "rs450" <RS450@YAHOO.COM>
• Re: [tuner23] Bad day at the dyno
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Bad day at the dyno
  • From: "sarcosis" <sarcosis@sbcglobal.net>
• Re: [tuner23] Bad day at the dyno
  • From: "sarcosis" <sarcosis@sbcglobal.net>
• Re: [tuner23] Bad day at the dyno
  • From: "Wendy Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Bad day at the dyno
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] 5.0 MAF cross-reference
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Parts for sale....
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• Re: [tuner23] Parts for sale....
  • From: Classic Photography <classicphotography@shaw.ca>
• Re: [tuner23] Parts for sale....
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• Re: [tuner23] Parts for sale....
  • From: Rob B <completleyincomplete@yahoo.com>
• Re: [tuner23] Parts for sale....
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• [tuner23] Newbie Questions
  • From: Bret Wylie <bret@sandiacreek.com>
• Re: [tuner23] Parts for sale....
  • From: Bob Saffian <Rsaffian@campbellsurvey.com>
• Re: Re: [tuner23] Parts for sale....
  • From: mblaw@bellsouth.net
• [tuner23] Newbie Questions - No goats?
  • From: Bret Wylie <bret@sandiacreek.com>
• Re: [tuner23] Parts for sale....
  • From: Bob Saffian <Rsaffian@campbellsurvey.com>
• Re: [tuner23] Newbie Questions - No goats?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Parts for sale....
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• [tuner23] LA3 and 88 thunderbird engine harness
  • From: "Lee" <dxrcivic89@yahoo.com>
• [tuner23] just installed my tuner
  • From: "blackturboranger" <eviluncleal@aol.com>
• [tuner23] pf3 hex breakdown
  • From: "blackturboranger" <eviluncleal@aol.com>
• Re: [tuner23] pf3 hex breakdown
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] pf3 hex breakdown
  • From: Bret Wylie <bret@sandiacreek.com>
• [tuner23] EEC Tuner Programming Basics
  • From: Bret Wylie <bret@sandiacreek.com>
• Re: [tuner23] EEC Tuner Programming Basics
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• [tuner23] PF series was Re: la3?
  • From: "qhap" <qhap@earthlink.net>
• Re: [tuner23] pf3 hex breakdown
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Will a tuner work for me?
  • From: "turbomustang23" <turbo23stang@msn.com>
• Re: [tuner23] Will a tuner work for me?
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• Re: [tuner23] PF series was Re: la3?
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] Will a tuner work for me?
  • From: Kurt Gugisberg <kurtgug@earthlink.net>
• [tuner23] PF series was Re: la3?
  • From: "qhap" <qhap@earthlink.net>
• [tuner23] RE: PF series was Re: la3?
  • From: "Hymbaugh, Mike" <mhymbaugh@hrgreen.com>
• Re: [tuner23] PF series was Re: la3?
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] PF series was Re: la3? MAF question addition
  • From: Ryan Mattson <rmattson@company23.com>
• Re: [tuner23] PF series was Re: la3? MAF question addition
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] PF series was Re: la3?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] PF series was Re: la3?
  • From: "qhap" <qhap@earthlink.net>
• [tuner23] RE: PF series was Re: la3?
  • From: "Hymbaugh, Mike" <mhymbaugh@hrgreen.com>
• [tuner23] Ford F50F MAF transfer
  • From: Ryan Mattson <rmattson@company23.com>
• RE: [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• RE: [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• RE: [tuner23] Re: Coastdown Fuel Cutoff (F_162C on LA3)
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Ford F50F MAF transfer
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] sorry for a probably simple question
  • From: "yyaarr1965" <yyaarr1965@yahoo.com>
• Re: [tuner23] Re: Ford F50F MAF transfer
  • From: Ryan Mattson <rmattson@company23.com>
• [tuner23] Stock bin from Brazilian car
  • From: "nggt" <hvila@intercom.org.br>
• Re: [tuner23] Stock bin from Brazilian car
  • From: "Wendy Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Stock bin from Brazilian car
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] New file uploaded to tuner23
  • From: tuner23@yahoogroups.com
• Re: [tuner23] New file uploaded to tuner23
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] Re: Ford F50F MAF transfer
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] New file uploaded to tuner23
  • From: Bret Wylie <bret@sandiacreek.com>
• Re: [tuner23] Re: Ford F50F MAF transfer
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] New file uploaded to tuner23
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Re: Ford F50F MAF transfer
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• RE: [tuner23] Re: Ford F50F MAF transfer
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Re: Ford F50F MAF transfer
  • From: kenskila@aol.com
• RE: [tuner23] Re: Ford F50F MAF transfer
  • From: d <dimswits@ix.netcom.com>
• RE: [tuner23] Re: Ford F50F MAF transfer
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Re: Ford F50F MAF transfer
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: Ford F50F MAF transfer
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Re: Ford F50F MAF transfer
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] Re: Ford F50F MAF transfer
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Re: Ford F50F MAF transfer
  • From: "Wendy Proctor" <maproctor@houston.rr.com>
• [tuner23] 3-BAR Digital MAP
  • From: "Wendy Proctor" <maproctor@houston.rr.com>
• [tuner23] FC series rdt?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Ford F50F MAF transfer
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Re: Ford F50F MAF transfer
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: Ford F50F MAF transfer
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Re: 3-BAR Digital MAP
  • From: "Ed Hohenberg" <66gto@canada.com>
• Re: [tuner23] Re: 3-BAR Digital MAP
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: MAF idle voltage
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: MAF idle voltage
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Re: MAF idle voltage
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Re: MAF idle voltage
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] Re: Thanks!
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] running poorly - kinda long
  • From: "Hymbaugh, Mike" <mhymbaugh@hrgreen.com>
• Re: [tuner23] running poorly - kinda long
  • From: d <dimswits@ix.netcom.com>
• RE: [tuner23] running poorly - kinda long
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] 4cyl binary codes and Tweecer compatability
  • From: "turboscv6" <rriggin@earthlink.net>
• [tuner23] RE: running poorly - kinda long
  • From: "Hymbaugh, Mike" <mhymbaugh@hrgreen.com>
• [tuner23] RE: running poorly - kinda long
  • From: "Hymbaugh, Mike" <mhymbaugh@hrgreen.com>
• Re: [tuner23] RE: running poorly - kinda long
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] update Re: running poorly
  • From: "Mike Hymbaugh" <mhymbaugh@hrgreen.com>
• Re: [tuner23] update Re: running poorly
  • From: RS <RS450@YAHOO.COM>
• [tuner23] update Re: running poorly
  • From: "Mike Hymbaugh" <mhymbaugh@hrgreen.com>
• RE: [tuner23] update Re: running poorly
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] update Re: running poorly
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] update Re: running poorly
  • From: "Mike Hymbaugh" <mhymbaugh@hrgreen.com>
• [tuner23] test this
  • From: "sarcosis" <sarcosis@sbcglobal.net>
• Re: [tuner23] test this
  • From: "sarcosis" <sarcosis@sbcglobal.net>
• [tuner23] I want a T3 turbo and an EEC-IV decoder
  • From: "junior_337" <junior337@hotmail.com>
• Re: [tuner23] I want a T3 turbo and an EEC-IV decoder
  • From: Gtprototyp@aol.com
• [tuner23] Re: I want a T3 turbo and an EEC-IV decoder
  • From: "junior_337" <junior337@hotmail.com>
• Re: [tuner23] I want a T3 turbo and an EEC-IV decoder
  • From: tony ort <tonyturbo83@yahoo.com>
• Re: [tuner23] I want a T3 turbo and an EEC-IV decoder
  • From: "Jason Baker" <junior337@hotmail.com>
• Re: [tuner23] I want a T3 turbo and an EEC-IV decoder
  • From: "Jason Baker" <junior337@hotmail.com>
• [tuner23] My car is retarded.
  • From: "hlvngnr" <king67@peoplepc.com>
• Re: [tuner23] My car is retarded.
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Any EEC Consultants Out There?
  • From: "silver86svo" <chapman1@attglobal.net>
• [tuner23] Dual Plug support: hex addresses
  • From: "pritch82" <pritch82@yahoo.com>
• Re: [tuner23] Any EEC Consultants Out There?
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• Re: [tuner23] Any EEC Consultants Out There?
  • From: "Dean Chapman" <chapman1@attglobal.net>
• Re: [tuner23] Any EEC Consultants Out There?
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Any EEC Consultants Out There?
  • From: "Mike Breinin" <mblaw@bellsouth.net>
• Re: [tuner23] Any EEC Consultants Out There?
  • From: Ryan Mattson <rmattson@company23.com>
• [tuner23] VDO EEC Parts Replacement Catalog
  • From: William A Williams <bwmsbldr@juno.com>
• RE: [tuner23] Dual Plug support: hex addresses
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Dual Plug support: hex addresses
  • From: "pritch82" <pritch82@yahoo.com>
• RE: [tuner23] Dual Plug support: hex addresses
  • From: john doedoe <sbeemturbo@yahoo.com>
• RE: [tuner23] Dual Plug support: hex addresses
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Dual Plug support: hex addresses
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] 86# injectors F/S
  • From: bugzturbo@aol.com
• Re: [tuner23] 86# injectors F/S
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• [tuner23] MAF/PE question
  • From: "Harry King" <king67@peoplepc.com>
• Re: [tuner23] MAF/PE question
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] MAF/PE question
  • From: "Harry King" <king67@peoplepc.com>
• Re: [tuner23] MAF/PE question
  • From: "Harry King" <king67@peoplepc.com>
• [tuner23] [Fwd: EEC-IV handbook sale]
  • From: allan slocum <aslocum@adelphia.net>
• [tuner23] Re: [XR4-Xtreme] [Fwd: EEC-IV handbook sale]
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] PE & PK1 ECU's for sale
  • From: bugzturbo@aol.com
• [XR4-Xtreme] Re: [tuner23] [Fwd: EEC-IV handbook sale]
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: MAF/PE question
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] Engineering Change #2
  • From: Keith Cua <fast_xr4@yahoo.com>
• [tuner23] Re: cutting prob
  • From: "fast_xr4" <fast_xr4@yahoo.com>
• Re: [tuner23] [Fwd: EEC-IV handbook sale]
  • From: SCEIA <Tony.Sceia@us.ibm.com>
• RE: [tuner23] Engineering Change #2
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] More stuff for sale
  • From: bugzturbo@aol.com
• [tuner23] Attn Dan Colvin!
  • From: "pureponcho" <maproctor@houston.rr.com>
• [tuner23] MAF curve wanted
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] MAF curve wanted
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] MAF curve wanted
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Some more stuff for sale.....
  • From: bugzturbo@aol.com
• [tuner23] PE timing tables
  • From: "Scott Ressler" <carcrazyscott@yahoo.com>
• Re: [tuner23] PE timing tables
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] how to setup EEC for 75# injectors?
  • From: "fast_xr4" <fast_xr4@yahoo.com>
• [tuner23] Re: PE timing tables
  • From: "fast_xr4" <fast_xr4@yahoo.com>
• [tuner23] Help with file!!
  • From: "chaze3000" <chaze3000@yahoo.com>
• [tuner23] PCMX - what does it really do
  • From: "corner_carver99" <corner_carver99@yahoo.com>
• [tuner23] merkurallan your PF3 bin wont load, mind sending it tome with some advice?
  • From: "posts_55" <posts_55@yahoo.com>
• [tuner23] Total Ignition Timing
  • From: "sdc19x" <sdc19x@yahoo.com>
• [tuner23] 80 MM COBRA MAF
  • From: "juscuz_motorsports" <juscuz@chartermi.net>
• [tuner23] 80 MM cobra maf
  • From: "Ben and Tina" <juscuz@chartermi.net>
• [tuner23] re: svo reunion
  • From: "Robert Wagner" <rpwII@insightbb.com>
• [tuner23] Minimum laptop requirements
  • From: Nathan McVey <natmac3@yahoo.com>
• [tuner23] stock tune up/drivability
  • From: "hipo12002" <dtbonzat@netscape.net>
• [tuner23] NHRA 2.3 turbo car need help (long post)
  • From: "bushwacker_racing" <460tbird@cableone.net>
• [tuner23] maf conversion ????
  • From: "boosten84" <boosten84@yahoo.com>
• [tuner23] still trying to get a post to work: Laptop Q&A
  • From: "natmac3" <natmac3@yahoo.com>
• [tuner23] a/f with new la3 rdt file
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] Minimum laptop requirements
  • From: eviluncleal@aol.com
• [tuner23] Re: how to setup EEC for 75# injectors?
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Minimum laptop requirements
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re: Total Ignition Timing
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] Re: Total Ignition Timing
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• RE: [tuner23] Re: Total Ignition Timing <Acceleration advance>
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: a/f with new la3 rdt file
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] Re: Total Ignition Timing <Acceleration advance>
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• RE: [tuner23] Re: Total Ignition Timing <Acceleration advance>
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Total Ignition Timing <Acceleration advance>
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• RE: [tuner23] re: svo reunion
  • From: "Ethan" <pipc@hubwest.com>
• RE: [tuner23] Re: Total Ignition Timing <Acceleration advance>
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] maf conversion ????
  • From: "Kenneth Savage" <ksavage@uhs.edu>
• Re: [tuner23] 80 MM cobra maf
  • From: "Kenneth Savage" <ksavage@uhs.edu>
• Re: [tuner23] 80 MM COBRA MAF
  • From: Scott Shidel <coolhandboost@yahoo.com>
• Re: [tuner23] 80 MM cobra maf
  • From: "HARRY KING" <king67@peoplepc.com>
• [tuner23] Re: maf conversion ????
  • From: "boosten84" <boosten84@yahoo.com>
• Re: [tuner23] 80 MM cobra maf
  • From: "Kenneth Savage" <ksavage@uhs.edu>
• Re: [tuner23] 80 MM cobra maf
  • From: "Harry King" <king67@peoplepc.com>
• [tuner23] Re: Low impedence injectors
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Minimum laptop requirements
  • From: "Ben and Tina" <juscuz@chartermi.net>
• [tuner23] SCEIA/Philadelphia/IBM is out of the office.
  • From: SCEIA <Tony.Sceia@us.ibm.com>
• [tuner23] Re: how to setup EEC for 75# injectors?
  • From: "fast_xr4" <fast_xr4@yahoo.com>
• [tuner23] tuning after new head and cam
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] PF3 RDT
  • From: "fast_xr4" <fast_xr4@yahoo.com>
• Re: [tuner23] tuning after new head and cam
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] tuning after new head and cam
  • From: "Harry King" <king67@peoplepc.com>
• [tuner23] Data logging
  • From: "Ben and Tina" <juscuz@chartermi.net>
• Re: [tuner23] Data logging
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] tuning after new head and cam
  • From: Chad Hayes <chaze3000@yahoo.com>
• [tuner23] Timing curve for Turbo 2.3
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• Re: [tuner23] tuning after new head and cam
  • From: "HARRY KING" <king67@peoplepc.com>
• [tuner23] Re: how to setup EEC for 75# injectors?
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Timing curve for Turbo 2.3
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Timing curve for Turbo 2.3
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• Re: [tuner23] Timing curve for Turbo 2.3
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: how to setup EEC for 75# injectors
  • From: Dan Stokes <dstokes@coin.org>
• [tuner23] RE: Timing curve for Turbo 2.3
  • From: "Hymbaugh, Mike" <mhymbaugh@hrgreen.com>
• [tuner23] Re: how to setup EEC for 75# injectors
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] Re: Total Ignition Timing
  • From: "sdc19x" <sdc19x@yahoo.com>
• [tuner23] Re: Total Ignition Timing
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] What is Engine Load? REF: Total Ignition Timing
  • From: Dan Stokes <dstokes@coin.org>
• RE: [tuner23] Re: What is Engine Load? REF: Total Ignition Timing
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Re: What is Engine Load? REF: Total Ignition Timing
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Big turbo will anything help spool
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: eviluncleal@aol.com
• Re: [tuner23] Big turbo will anything help spool
  • From: Bret Wylie <bret@sandiacreek.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: eviluncleal@aol.com
• Re: [tuner23] Big turbo will anything help spool
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: eviluncleal@aol.com
• Re: [tuner23] Big turbo will anything help spool
  • From: Bret Wylie <bret@sandiacreek.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: eviluncleal@aol.com
• Re: [tuner23] Big turbo will anything help spool
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Big turbo will anything help spool
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: "Dean Chapman" <chapman1@attglobal.net>
• Re: [tuner23] Big turbo will anything help spool
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: eviluncleal@aol.com
• Re: [tuner23] Big turbo will anything help spool
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] When good MAFs go bad....need some help
  • From: "hlvngnr" <king67@peoplepc.com>
• Re: [tuner23] When good MAFs go bad....need some help
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] When good MAFs go bad....need some help
  • From: "Harry King" <king67@peoplepc.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] When good MAFs go bad....need some help
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] When good MAFs go bad....need some help
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] When good MAFs go bad....need some help
  • From: "Harry King" <king67@peoplepc.com>
• Re: [tuner23] When good MAFs go bad....need some help
  • From: eviluncleal@aol.com
• [tuner23] RE: Big turbo will anything help spool
  • From: "Hymbaugh, Mike" <mhymbaugh@hrgreen.com>
• [tuner23] RE: Big turbo will anything help spool
  • From: "Hymbaugh, Mike" <mhymbaugh@hrgreen.com>
• Re: [tuner23] RE: Big turbo will anything help spool
  • From: "Dean Chapman" <chapman1@attglobal.net>
• Re: [tuner23] When good MAFs go bad....need some help
  • From: Dan Stokes <dstokes@coin.org>
• Re: [tuner23] When good MAFs go bad....need some help
  • From: "HARRY KING" <king67@peoplepc.com>
• [tuner23] MAF problem solved, if not understood
  • From: "hlvngnr" <king67@peoplepc.com>
• [tuner23] Re: MAF problem solved, if not understood
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Re: MAF problem solved, if not understood
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: MAF problem solved, if not understood
  • From: "HARRY KING" <king67@peoplepc.com>
• RE: [tuner23] Re: MAF problem solved, if not understood
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: MAF problem solved, if not understood
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• RE: [tuner23] Re: MAF problem solved, if not understood
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: MAF problem solved, if not understood
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] Tuner Probs help!!!!
  • From: Chad Hayes <chaze3000@yahoo.com>
• [tuner23] SCEIA/Philadelphia/IBM is out of the office.
  • From: SCEIA <Tony.Sceia@us.ibm.com>
• Re: [tuner23] Tuner Probs help!!!!
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Test Post
  • From: William A Williams <bwmsbldr@juno.com>
• RE: [tuner23] Test Post
  • From: "Nick Salyer" <salyer4@pacbell.net>
• [tuner23] New To EEC tuner, ect.
  • From: "turboxr4ti" <salyer4@pacbell.net>
• [tuner23] eec tuner newbie.
  • From: "Nick Salyer" <salyer4@pacbell.net>
• [tuner23] New to eec tuner.
  • From: "Nick Salyer" <salyer4@pacbell.net>
• [tuner23] Re: Minimum laptop requirements
  • From: "whiteshakazulu" <whiteshakazulu@yahoo.com>
• [tuner23] LA3 GUIEEC processor file & DIY vs EECtuner/PCMX options?
  • From: Brantley Smith <srvblues00@yahoo.com>
• [tuner23] Anyone modified a PE file for larger injectors?
  • From: "svony23" <svony23@yahoo.com>
• Re: [tuner23] RE: Big turbo will anything help spool
  • From: Scott Shidel <coolhandboost@yahoo.com>
• [tuner23] Re: Tuner Probs help!!!!
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Tuner Probs help!!!!
  • From: Wesley Phillips <svony23@yahoo.com>
• Re: [tuner23] Minimum laptop requirements
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] LA3 GUIEEC processor file & DIY vs EECtuner/PCMX options?
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] New to eec tuner.
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] New to eec tuner.
  • From: "Harry King" <king67@peoplepc.com>
• Re: [tuner23] Anyone modified a PE file for larger injectors?
  • From: Wesley Phillips <svony23@yahoo.com>
• Re: [tuner23] Test Post
  • From: William A Williams <bwmsbldr@juno.com>
• RE: [tuner23] New to eec tuner.
  • From: "Nick Salyer" <salyer4@pacbell.net>
• [tuner23] Now for the noob questions
  • From: "Nick Salyer" <salyer4@pacbell.net>
• [tuner23] RE: Big turbo will anything help spool
  • From: "Hymbaugh, Mike" <mhymbaugh@hrgreen.com>
• Re: [tuner23] Minimum laptop requirements
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Minimum laptop requirements
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] Minimum laptop requirements
  • From: "Nick Salyer" <salyer4@pacbell.net>
• [tuner23] Miscellaneous Merkur Questions!
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Big turbo will anything help spool
  • From: "Ben and Tina" <juscuz@chartermi.net>
• [tuner23] timing map numbers.
  • From: "turboxr4ti" <salyer4@pacbell.net>
• [tuner23] Re: timing map numbers.
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] fuel injectors
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] timing map numbers.
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re: fuel injectors
  • From: "turboxr4ti" <salyer4@pacbell.net>
• Re: [tuner23] fuel injectors
  • From: "Ben and Tina" <juscuz@chartermi.net>
• [tuner23] no start condition
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] no start condition
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] no start condition
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] no start cont.
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] no start cont.
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] no start condition
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] no start cont.
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] no start cont 2
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] Datalogging Please
  • From: "turboxr4ti" <salyer4@pacbell.net>
• [tuner23] Lean Throttle tip-ins
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Lean Throttle tip-ins
  • From: "Harry King" <king67@peoplepc.com>
• RE: [tuner23] Lean Throttle tip-ins
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Forge
  • From: "Ben and Tina" <juscuz@chartermi.net>
• [tuner23] PK1 Processor type
  • From: "Nick Salyer" <salyer4@pacbell.net>
• Re: [tuner23] PK1 Processor type
  • From: Kevin Timmerman <lists@pcmx.net>
• [tuner23] logging Q's again
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• RE: [tuner23] logging Q's again
  • From: "Nick Salyer" <salyer4@pacbell.net>
• RE: [tuner23] PK1 Processor type
  • From: "Nick Salyer" <salyer4@pacbell.net>
• RE: [tuner23] PK1 Processor type
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] PK1 Processor type
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] PK1 Processor type
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Mass Air Problems
  • From: "Nick Salyer" <salyer4@pacbell.net>
• Re: [tuner23] Mass Air Problems
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] Mass Air Problems
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Mass Air Problems
  • From: "Nick Salyer" <salyer4@pacbell.net>
• [tuner23] Re: Mass Air Problems
  • From: "Nick Salyer" <salyer4@pacbell.net>
• RE: [tuner23] Re: Mass Air Problems
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Mass Air Problems
  • From: "Nick Salyer" <salyer4@pacbell.net>
• Re: [tuner23] Lean Throttle tip-ins
  • From: d <dimswits@ix.netcom.com>
• RE: [tuner23] Lean Throttle tip-ins
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] new problem with tuner or something
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] new problem with tuner or something
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] new problem with tuner or something
  • From: "Harry King" <king67@peoplepc.com>
• [tuner23] Re: new problem with tuner or something
  • From: "mjkrader" <mjkrader@yahoo.com>
• RE: [tuner23] Lean Throttle tip-ins
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Wideband Air/Fuel Ratio Meter Group Purchase!!!
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] how to lean out part throttle
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] how to lean out part throttle
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Alternate method of cam sprocket retention
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Latest revelation on idle speed!
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Latest revelation on idle speed!
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] Latest revelation on idle speed!
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Help newbie to EEC tuning
  • From: "ipakgat" <levi@allen-family.com>
• Re: [tuner23] Help newbie to EEC tuning
  • From: "Ben and Tina" <juscuz@chartermi.net>
• Re: [tuner23] Help newbie to EEC tuning
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Latest revelation on idle speed!
  • From: michael krader <mjkrader@yahoo.com>
• [tuner23] more problems
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] more problems
  • From: James <jamessw@telus.net>
• [tuner23] Re: more problems
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] Help newbie to EEC tuning
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] Help newbie to EEC tuning
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] Help newbie to EEC tuning
  • From: "Levi Allen" <levi@allen-family.com>
• RE: [tuner23] Help newbie to EEC tuning
  • From: "Levi Allen" <levi@allen-family.com>
• [tuner23] Ranger cam question
  • From: "Kenneth Savage" <ksavage@uhs.edu>
• Re: [tuner23] Ranger cam question
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] setting com port
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] Ranger cam question
  • From: eviluncleal@aol.com
• [tuner23] EEC fueling algorithms question
  • From: "ichbinbose" <ghemsley@mdi.ca>
• Re: [tuner23] setting com port
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] EEC fueling algorithms question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Attention John Baas
  • From: William A Williams <bwmsbldr@juno.com>
• RE: [tuner23] Help newbie to EEC tuning
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] setting com port
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: EEC fueling algorithms question
  • From: "ichbinbose" <ghemsley@mdi.ca>
• Re: [tuner23] Re: EEC fueling algorithms question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: EEC fueling algorithms question
  • From: "ichbinbose" <ghemsley@mdi.ca>
• Re: [tuner23] Re: EEC fueling algorithms question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: EEC fueling algorithms question
  • From: "ichbinbose" <ghemsley@mdi.ca>
• RE: [tuner23] Re: EEC fueling algorithms question
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] EEC fueling algorithms question
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• Re: [tuner23] EEC fueling algorithms question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Re: EEC fueling algorithms question
  • From: RS <RS450@YAHOO.COM>
• RE: [tuner23] EEC fueling algorithms question
  • From: john doedoe <sbeemturbo@yahoo.com>
• RE: [tuner23] Re: EEC fueling algorithms question
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Help newbie to EEC tuning
  • From: Steve Meyer <smeyer@socal.rr.com>
• Re: [tuner23] Re: EEC fueling algorithms question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] EEC fueling algorithms question
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• Re: [tuner23] EEC fueling algorithms question
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] EEC fueling algorithms question
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Ranger cam question
  • From: "Kenneth Savage" <ksavage@uhs.edu>
• [tuner23] Re: Ranger cam question
  • From: "ichbinbose" <ghemsley@mdi.ca>
• Re: [tuner23] Ranger cam question
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Ranger cam question
  • From: "Kenneth Savage" <ksavage@uhs.edu>
• Re: [tuner23] Ranger cam question
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Transfer Function
  • From: "tej86svo" <pipc@hubwest.com>
• [tuner23] Re: Transfer Function
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] Re: Transfer Function
  • From: "HARRY KING" <king67@peoplepc.com>
• [tuner23] ok so I'm gonna start my maf conversion.. but:
  • From: "Jason Hollister" <cosworth@shaw.ca>
• [tuner23] ok so I'm gonna start my maf conversion.. but:
  • From: "Jason Hollister" <cosworth@shaw.ca>
• RE: [tuner23] ok so I'm gonna start my maf conversion.. but:
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] ok so I'm gonna start my maf conversion.. but:
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] ok so I'm gonna start my maf conversion.. but:
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• RE: [tuner23] ok so I'm gonna start my maf conversion.. but:
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: ok so I'm gonna start my maf conversion.. but:
  • From: "Jason Hollister" <cosworth@shaw.ca>
• [tuner23] J Hinkle Post about engine misfires
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: "Jason Hollister" <cosworth@shaw.ca>
• [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• [tuner23] Re: [M] J Hinkle Post about engine misfires
  • From: Merk23literturbo@aol.com
• Re: [tuner23] J Hinkle Post about engine misfires
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] Re: [M] J Hinkle Post about engine misfires
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: michael krader <mjkrader@yahoo.com>
• [tuner23] Dual ported WGA
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Sellin my Volvo 16v head - complete for Ford swap
  • From: bugzturbo@aol.com
• Re: [tuner23] Dual ported WGA
  • From: OneLoudMerkur@aol.com
• [tuner23] NewBee question on LA3
  • From: "turbobird2000" <turbobird2000@yahoo.com>
• Re: [tuner23] NewBee question on LA3
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] NewBee question on LA3
  • From: "HARRY KING" <king67@peoplepc.com>
• Re: [tuner23] NewBee question on LA3
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] multiple throttle plates and TPS sensitivity?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] multiple throttle plates and TPS sensitivity?
  • From: James <jamessw@telus.net>
• [tuner23] Re: NewBee question on LA3
  • From: "Ed Hohenberg" <66gto@canada.com>
• RE: [tuner23] Dual ported WGA
  • From: "Ken Maynard" <kmaynard@bge.net>
• [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• Re: [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] Re: NewBee question on LA3
  • From: "turbobird2000" <turbobird2000@yahoo.com>
• Re: [tuner23] Re: NewBee question on LA3
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] Re: NewBee question on LA3
  • From: michael krader <mjkrader@yahoo.com>
• RE: [tuner23] Re: NewBee question on LA3
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: "gearhead4you" <gearhead4you@yahoo.com>
• [tuner23] Ethics of modifying ROMs
  • From: "Nick Salyer" <salyer4@pacbell.net>
• RE: [tuner23] Ethics of modifying ROMs
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Ethics of modifying ROMs
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] Ethics of modifying ROMs
  • From: "HARRY KING" <king67@peoplepc.com>
• Re: [tuner23] Ethics of modifying ROMs
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• Re: [tuner23] Ethics of modifying ROMs
  • From: "Harry King" <king67@peoplepc.com>
• Re: [tuner23] Ethics of modifying ROMs
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• RE: [tuner23] Ethics of modifying ROMs
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• Re: [tuner23] Ethics of modifying ROMs
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Ethics of modifying ROMs
  • From: "haroldina" <harold@princessharold.net>
• [tuner23] Subaru MAF's for sale
  • From: bugzturbo@aol.com
• [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] Grounds
  • From: William A Williams <bwmsbldr@juno.com>
• RE: [tuner23] Ethics of modifying ROMs
  • From: "Ken Maynard" <kmaynard@bge.net>
• RE: [tuner23] Grounds
  • From: "Nick Salyer" <salyer4@pacbell.net>
• [tuner23] xla3.rdt - Is Resource difinition File
  • From: "turbobird2000" <turbobird2000@yahoo.com>
• Re: [tuner23] Ethics of modifying ROMs
  • From: "Jason J" <duecento@comcast.net>
• Re: [tuner23] Grounds
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Grounds
  • From: Dejan Cokic <DejanC@optonline.net>
• Re: [tuner23] xla3.rdt - Is Resource difinition File
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Grounds
  • From: "Mike" <res1lowz@verizon.net>
• RE: [tuner23] Grounds
  • From: "Nick Salyer" <salyer4@pacbell.net>
• [tuner23] SCEIA/Philadelphia/IBM is out of the office.
  • From: SCEIA <Tony.Sceia@us.ibm.com>
• RE: [tuner23] Ethics of modifying ROMs
  • From: "Nick Salyer" <salyer4@pacbell.net>
• Re: [tuner23] Grounds
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Grounds
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Grounds
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Digest Number 768
  • From: davereichert@juno.com
• Re: [tuner23] Digest Number 768
  • From: Dejan Cokic <DejanC@optonline.net>
• Re: [tuner23] xla3.rdt - Is Resource difinition File
  • From: michael krader <mjkrader@yahoo.com>
• Re: [tuner23] Digest Number 768
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Digest Number 768
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Re: xla3.rdt - Is Resource difinition File
  • From: "turbobird2000" <turbobird2000@yahoo.com>
• Re: [tuner23] Grounds
  • From: Chad Hayes <chaze3000@yahoo.com>
• Re: [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: Chad Hayes <chaze3000@yahoo.com>
• Re: [tuner23] Digest Number 769
  • From: davereichert@juno.com
• Re: [tuner23] Re: ...start my maf conversion. but (ACT placement)
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] Digest Number 769
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Digest Number 769
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Doing the MAF swap finally.!?
  • From: Chad Hayes <chaze3000@yahoo.com>
• Re: [tuner23] Doing the MAF swap finally.!?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Doing the MAF swap finally.!?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] XR4Ti heater control valve
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] 4-wire O2 sensor + connector
  • From: davereichert@juno.com
• Re: [tuner23] 4-wire O2 sensor + connector
  • From: john doedoe <sbeemturbo@yahoo.com>
• Re: [tuner23] 4-wire O2 sensor + connector
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] I am another 88 t/c owner as well
  • From: Dave Chaszewski <northernlights2nite@yahoo.com>
• [tuner23] timing
  • From: "mike keilman" <cmd9815l@sbcglobal.net>
• RE: [tuner23] timing
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• [tuner23] Re: Grounds
  • From: gearhead4you@yahoo.com
• [tuner23] '88 TC for sale in Ohio
  • From: "Ken Maynard" <kmaynard@bge.net>
• Re: [tuner23] Digest Number 772
  • From: davereichert@juno.com
• Re: [tuner23] Digest Number 772
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] Cold Weather "Tuner Problem" Solved
  • From: "dpdisxr4ti" <brad.anesi@netiq.com>
• Re: [tuner23] Cold Weather "Tuner Problem" Solved
  • From: "Kenneth Savage" <ksavage@uhs.edu>
• RE: [tuner23] Cold Weather "Tuner Problem" Solved
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] la3 specific Q's
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] Re: Cold Weather "Tuner Problem" Solved
  • From: "mjkrader" <mjkrader@yahoo.com>
• [tuner23] SCEIA/Philadelphia/IBM is out of the office.
  • From: SCEIA <Tony.Sceia@us.ibm.com>
• [tuner23] Re: la3 specific Q's
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] Anyone interested in a complete Esslinger SVO head setup?
  • From: bugzturbo@aol.com
• Re: [tuner23] Anyone interested in a complete Esslinger SVO headset up?
  • From: "Kenneth Savage" <ksavage@uhs.edu>
• [tuner23] Re: la3 specific Q's
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Anyone interested in a complete Esslinger SVO headset up?
  • From: "Willie Stilwell" <willie@basin-net.net>
• [tuner23] First Time Tuning
  • From: "duckman6677" <f_reyno@hotmail.com>
• [tuner23] Raising Open Loop
  • From: "duckman6677" <f_reyno@hotmail.com>
• [tuner23] Got a Tuner for X-mas, now I've got a question...
  • From: "duckman6677" <f_reyno@hotmail.com>
• RE: [tuner23] Raising Open Loop
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] First Time Tuning
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] First Time Tuning
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Raising Open Loop
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] First Time Tuning
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] First Time Tuning
  • From: RS <RS450@YAHOO.COM>
• [tuner23] New Version of PCMX
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Removing Tuner
  • From: "svony23" <svony23@yahoo.com>
• Re: [tuner23] Removing Tuner
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• [tuner23] Re: Removing Tuner
  • From: "svony23" <svony23@yahoo.com>
• [tuner23] Maf sizes
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• Re: [tuner23] Maf sizes
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• Re: [tuner23] Maf sizes
  • From: "Harry King" <king67@peoplepc.com>
• [tuner23] Re: Maf sizes
  • From: bugzturbo@aol.com
• [tuner23] La3
  • From: "gearhead4you" <gearhead4you@yahoo.com>
• Re: [tuner23] La3
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] La3
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] can anyone
  • From: "turbo23_7" <turbo23_7@hotmail.com>
• [tuner23] Re: La3
  • From: "gearhead4you" <gearhead4you@yahoo.com>
• [tuner23] Re: can anyone
  • From: "Tony Vissoc" <tvissoc@team-v.net>
• RE: [tuner23] Re: can anyone
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] can anyone
  • From: Dejan Cokic <DejanC@optonline.net>
• Re: [tuner23] can anyone
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• [tuner23] O2 disable
  • From: john doedoe <sbeemturbo@yahoo.com>
• RE: [tuner23] O2 disable
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] O2 disable
  • From: john doedoe <sbeemturbo@yahoo.com>
• [tuner23] Re: can anyone
  • From: "fast_xr4" <fast_xr4@yahoo.com>
• RE: [tuner23] Re: can anyone
  • From: "Kenneth Savage" <ksavage@uhs.edu>
• Re: [tuner23] Re: La3
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] can anyone
  • From: "Alexander Fernandes" <Safado@pacbell.net>
• RE: [tuner23] can anyone
  • From: "Bob Saffian" <Rsaffian@campbellsurvey.com>
• [tuner23] Re: O2 disable
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] xpe.rdt
  • From: "bbesedin" <bbesedin@yahoo.com>
• Re: [tuner23] Re: O2 disable
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] xpe.rdt
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Re: New Version of PCMX
  • From: "mjkrader" <mjkrader@yahoo.com>
• Re: [tuner23] Re: New Version of PCMX
  • From: RS <RS450@YAHOO.COM>
• [tuner23] Craig Moates
  • From: "chris_grenke" <cgrenke@cogeco.ca>
• [tuner23] Craig Moates / Cheap ECM Tuner
  • From: "chris_grenke" <cgrenke@cogeco.ca>
• [tuner23] maf conversion made easy-can't read
  • From: "wakiser" <parrothead350@hotmail.com>
• Re: [tuner23] Craig Moates
  • From: "NS" <salyer4@pacbell.net>
• Re: [tuner23] Craig Moates
  • From: "Harry King" <king67@peoplepc.com>
• [tuner23] Re: maf conversion made easy-can't read
  • From: "gearhead4you" <gearhead4you@yahoo.com>
• [tuner23] Tuneability of Stock ECU?
  • From: "Jason Gehrke" <jwgeh@tpg.com.au>
• [tuner23] Re: Tuneability of Stock ECU?
  • From: "gearhead4you" <gearhead4you@yahoo.com>
• Re: [tuner23] Tuneability of Stock ECU?
  • From: michael krader <mjkrader@yahoo.com>
• [tuner23] Re: logging Q's again
  • From: "fast_xr4" <fast_xr4@yahoo.com>
• [tuner23] MAF causes amnesia - any ideas?
  • From: "hlvngnr" <king67@peoplepc.com>
• [tuner23] poor/rich idle with MAF Conversion
  • From: "mcflytrap" <marthias@hotmail.com>
• Re: [tuner23] poor/rich idle with MAF Conversion
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] poor/rich idle with MAF Conversion
  • From: "Kenneth Savage" <ksavage@uhs.edu>
• Re: [tuner23] poor/rich idle with MAF Conversion
  • From: "HARRY KING" <king67@peoplepc.com>
• Re: [tuner23] Re: logging Q's again
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] MAF causes amnesia - any ideas?
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] MAF causes amnesia - any ideas?
  • From: "Harry King" <king67@peoplepc.com>
• RE: [tuner23] poor/rich idle with MAF Conversion
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] MAF causes amnesia - any ideas?
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: poor/rich idle with MAF Conversion
  • From: "mcflytrap" <marthias@hotmail.com>
• RE: [tuner23] MAF causes amnesia - any ideas?
  • From: "HARRY KING" <king67@peoplepc.com>
• Re: [tuner23] MAF causes amnesia - any ideas?
  • From: Grve66@aol.com
• RE: [tuner23] MAF causes amnesia - any ideas?
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: MAF causes amnesia - any ideas?
  • From: "gearhead4you" <gearhead4you@yahoo.com>
• Re: [tuner23] MAF causes amnesia - any ideas?
  • From: "Harry King" <king67@peoplepc.com>
• Re: [tuner23] Re: MAF causes amnesia - any ideas?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] MAF causes amnesia - any ideas?
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Re: MAF causes amnesia - any ideas?
  • From: RS <RS450@YAHOO.COM>
• Re: [tuner23] MAF causes amnesia - any ideas?
  • From: "HARRY KING" <king67@peoplepc.com>
• [tuner23] Ford parts!
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Re: [XR4-Xtreme] Ford parts!
  • From: "The Robert & Vera Team" <Xr4ti@RnVteam.com>
• [tuner23] Re: logging Q's again
  • From: "fast_xr4" <fast_xr4@yahoo.com>
• RE: [tuner23] Re: logging Q's again
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: logging Q's again
  • From: "maxboosteric" <maxboosteric@hotmail.com>
• RE: [tuner23] Re: logging Q's again
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Digest Number 794
  • From: davereichert@juno.com
• [tuner23] Re: [M] You could hear a pin drop in here!
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Re: [M] You could hear a pin drop in here!
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Error messages with .zip files attached
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Virus
  • From: Pete Dunham <pmdunham@centurytel.net>
• [tuner23] Re: logging Q's again
  • From: "fast_xr4" <fast_xr4@yahoo.com>
• [tuner23] eec tuner for la3
  • From: "d76691" <d76691@yahoo.com>
• Re: [tuner23] Digest Number 793
  • From: mp23cc@aol.com
• [tuner23] new here and some basic EFI info needed
  • From: "morpheus4269" <morpheus4269@yahoo.com>
• Re: [tuner23] new here and some basic EFI info needed
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] new here and some basic EFI info needed
  • From: Merk23literturbo@aol.com
• [tuner23] How adjustable is it?
  • From: "racingbronco22" <bigbronco@swbell.net>
• RE: [tuner23] How adjustable is it?
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Modern Performance
  • From: davereichert@juno.com
• RE: [tuner23] Modern Performance
  • From: "Dave McFarland" <mustang@tampabay.rr.com>
• Re: [tuner23] Modern Performance
  • From: "Mike Hymbaugh" <mike@four-banger.net>
• Re: [tuner23] Digest Number 798
  • From: bugzturbo@aol.com
• Re: [tuner23] Digest Number 798
  • From: "Harry King" <67king@earthlink.net>
• Re: [tuner23] Digest Number 798
  • From: "Ben and Tina" <juscuz@chartermi.net>
• [tuner23] Re: RE: Modern Performance
  • From: davereichert@juno.com
• [tuner23] what happens
  • From: "d76691" <d7669111@mchsi.com>
• RE: [tuner23] what happens
  • From: "Harry King" <67king@earthlink.net>
• Re: [tuner23] what happens
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Digest Number 799
  • From: bugzturbo@aol.com
• Re: [tuner23] what happens
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Digest Number 799
  • From: "Ben and Tina" <juscuz@chartermi.net>
• Re: [tuner23] Digest Number 799
  • From: eviluncleal@aol.com
• Re: [tuner23] Digest Number 799
  • From: "Ben and Tina" <juscuz@chartermi.net>
• Re: [tuner23] what happens
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] what happens
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] what happens
  • From: "Harry King" <67king@earthlink.net>
• Re: [tuner23] Digest Number 799
  • From: OneLoudMerkur@aol.com
• [tuner23] Harry, when you went to MAF.....
  • From: "gearhead4you" <gearhead4you@yahoo.com>
• Re: [tuner23] Harry, when you went to MAF.....
  • From: William A Williams <bwmsbldr@juno.com>
• Re: [tuner23] Harry, when you went to MAF.....
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Digest Number 800
  • From: bugzturbo@aol.com
• Re: [tuner23] Digest Number 800
  • From: bugzturbo@aol.com
• Re: [tuner23] Harry, when you went to MAF.....
  • From: Dave Chaszewski <northernlights2nite@yahoo.com>
• Re: [tuner23] Harry, when you went to MAF.....
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Harry, when you went to MAF.....
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] Harry, when you went to MAF.....
  • From: William A Williams <bwmsbldr@juno.com>
• [tuner23] Newbie Maf Questions...
  • From: "Stinger" <yellow_stinger@hotmail.com>
• Re: [tuner23] Newbie Maf Questions...
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• Re: [tuner23] Newbie Maf Questions...
  • From: "Mike Hymbaugh" <mhymbaugh@huxcomm.net>
• Re: [tuner23] Newbie Maf Questions...
  • From: "Mark Proctor" <maproctor@houston.rr.com>
• [tuner23] Re: Newbie Maf Questions...
  • From: "Stinger" <yellow_stinger@hotmail.com>
• [tuner23] Use Tuner to Cover Up Engine Codes...Possible?
  • From: "Stinger" <yellow_stinger@hotmail.com>
• [tuner23] PF3 Base Fuel Table
  • From: "mcflytrap" <marthias@hotmail.com>
• [tuner23] LB3 vs. 8UA
  • From: "morpheus4269" <morpheus4269@yahoo.com>
• [tuner23] New guy with a few questions.
  • From: "martini_focus" <focused@focusedeffect.com>
• [tuner23] what was answer to new PCMX version status questions?
  • From: "Steven A. DuChene" <sduchene@mindspring.com>
• RE: [tuner23] LB3 vs. 8UA
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] Re: Newbie Maf Questions...
  • From: "Mike Hymbaugh" <mhymbaugh@huxcomm.net>
• [tuner23] Re: PF3 Base Fuel Table
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] Re: New guy with a few questions- spark
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• [tuner23] Want to get one, but how well is LA3 supported?
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• [tuner23] Re: Use Tuner to Cover Up Engine Codes...Possible?
  • From: "dan_xr4" <dan_xr4ti@yahoo.com>
• Re: [tuner23] Want to get one, but how well is LA3 supported?
  • From: Kurt Gugisberg <kurtgug@earthlink.net>
• [tuner23] Re: New guy with a few questions- spark
  • From: "martini_focus" <focused@focusedeffect.com>
• [tuner23] PCMX Injector Size Change
  • From: "enosommat" <enosommat@yahoo.com>
• [tuner23] Newbie with some Questions
  • From: "enosommat" <enosommat@yahoo.com>
• RE: [tuner23] PCMX Injector Size Change
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Want to get one, but how well is LA3 supported?
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Want to get one, but how well is LA3 supported?
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• RE: [tuner23] Want to get one, but how well is LA3 supported?
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] Want to get one, but how well is LA3 supported?
  • From: Merk23literturbo@aol.com
• RE: [tuner23] Want to get one, but how well is LA3 supported?
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] Want to get one, but how well is LA3 supported?
  • From: d <dimswits@ix.netcom.com>
• RE: [tuner23] Want to get one, but how well is LA3 supported?
  • From: Brad Anesi <brad.anesi@netiq.com>
• [tuner23] 2.3 MAF PCM's Supported by PCMX
  • From: Brad Anesi <brad.anesi@netiq.com>
• Re: [tuner23] 2.3 MAF PCM's Supported by PCMX
  • From: William A Williams <bwmsbldr@juno.com>
• RE: [tuner23] 2.3 MAF PCM's Supported by PCMX
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] 2.3 MAF PCM's Supported by PCMX
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• RE: [tuner23] 2.3 MAF PCM's Supported by PCMX
  • From: Brad Anesi <brad.anesi@netiq.com>
• RE: [tuner23] 2.3 MAF PCM's Supported by PCMX
  • From: "Jeremy Hidy" <Jeremy@in-touch.net>
• RE: [tuner23] 2.3 MAF PCM's Supported by PCMX
  • From: Jeffrey Engel <jengeltx@yahoo.com>
• Re: [tuner23] 2.3 MAF PCM's Supported by PCMX
  • From: "Mark Proctor"